How much does the roof billboard steel frame cost per square meter?

本文目录一览⒈I want to make a 5x15 meter outdoor floor-standing single-chip billboard. I don’t know the approximate price. How much does it cost per square meter or how much does it cost to make one?
I don’t know what you are talking about. Is there only one side of the inkjet billboard? If so, then it only counts the price of the steel structure plus the price of inkjet printing. For Hubei, the cost of the wall is about 200 for the steel structure. The roof is about 250 per square meter. One square meter of inkjet printing on the left and right costs 6 yuan per square meter.
If the steel structure wall is turned over on three sides, it costs 250 on the roof and 300 on the three sides. The national price ranges from 380-600. The three-sided painting costs about 20 yuan, including installation
Both. Priced in square meters. Hope this helps.

⒉How much does an aluminum-plastic panel billboard cost per square meter?

1. Generally, the labor and material quotation at the door is about 200 yuan. The simple aluminum-plastic panel materials are good and bad, and the posting skills are suitable. The thickness of the board is 3 mm, and the thickness of the board suitable for dry hanging technology is 4 mm, and the price difference is also relatively large.

2. Generally, the base layer of aluminum-plastic panels for exterior walls is not made of light steel keels. External walls generally adopt a dry-hanging process in consideration of the effect of sun protection and waterproofing. The aluminum-plastic panels are bent and fixed on square tubes. On the top, use foam rods to fill the seams between them, and use 995 structural glue to fill the seams on the outside. The general price of dry-hanging aluminum-plastic panels for exterior walls is around 280 yuan/square meter.

3. The price of aluminum-plastic panels ranges from 120 yuan to more than 300 yuan per square meter. Stone-like aluminum-plastic panels are still a relatively new decorative material, and of course are rarely used in home decoration.

??

⒊How much labor does it cost to make and install the steel frame of outdoor billboards?

Go to an advertising company for spray painting. It costs about 8 yuan per square meter. If the iron frame of 200 square meters is attached to the wall and is 30 to 50 centimeters tall, The thickness of the iron sheet is enough for 20,000 yuan (including the money for industrial and commercial approval). If it is on an open space (two sides), it will cost 50,000 to 60,000 yuan.

⒋Since I have never made a large outdoor billboard, I am seeking advice from an expert. How to make and fix a 40m*8m billboard on the roof of the building.
First conduct an on-site inspection: the structure of the building, the local wind force, the conditions around the building, whether it is in the wind outlet, etc. After analyzing the situation, after making the construction drawings, the main problem is rooting: if the roof of the building The structure is not good, cement beams must be built on the roof, and construction can only be carried out with full safety assurance; the market price in Huai'an should be: 180-260 yuan/square meter
Henan Huacheng Advertising Company 037165751900

相关文章