Ultra-thin double-sided light box billboard

Nowadays, it is easy for us to see some eye-catching billboards made of electronic light boxes on the street. Electronic light boxes are; using high-brightness light-emitting diodes, AOTE electronic light box controllers, and aluminum-plastic panels Electronic signboards composed of aluminum profiles. The production process is to use special engraving software to design the content, which can be text or graphics, and then you can achieve changes such as text or pattern flashing. So what is the price of an electronic light box? How to make it? The editor explains in detail Let me introduce it.

　

Electronic light box price introduction:

(1) Jixiang A9 electronic light box, material: aluminum-plastic plate, shape: black , specifications: 1.22×2.44×350 yuan (meter/square), size: 60×40 (cm), Hangzhou Guoshuai Lighting Engineering Co., Ltd.

　¥230.00 (minimum batch size 10-19 pieces)

p>

　¥220.00 (minimum batch size 20-29 pieces)

　¥200.00 (minimum batch size ≥ 30 pieces)

(2) Dianyi MS-001 electronic light box, material : Aluminum material, shape: square, specification size: 72×72 (cm), Jiangmen Dianyi Display Equipment Products Factory Co., Ltd.

　¥320.00 (minimum batch size 1-100 pieces)

< p>￥310.00 (minimum batch size ≥101 pieces)

(3) Huiling FG118-100 electronic light box, material: aluminum profile, shape: square, size: 100×200-5000×1200 (cm) , Guangzhou Huiling Advertising Equipment Co., Ltd.

￥800.00 (minimum batch size 5-9 square meters)

￥750.00 (minimum batch size ≥10 square meters)

(4) Shifang SFLB150D double-sided fabric electronic light box, material: aluminum profile/LED, shape: rectangular, size: 600 (cm), specifications: 1200×2000, 1500×2200, Guangzhou Shifang Advertising Co., Ltd.< /p>

　¥900.00 (minimum quantity ≥2 square meters)

　(5) Zhuowei MZ-D005 electronic light box, material: aluminum profile, galvanized pipe, galvanized sheet, tempered glass, Dimensions: length 150×thickness 35×height 250 (cm), Yangzhou Zhuowei Municipal Facilities Technology Co., Ltd.

￥2800.00 (minimum batch size ≥10 units) Price source network, for reference only.

　

Lightbox production steps:

1. Typesetting in CorelDRAW software, arrange the size and distance of the content, and In the future, a circle with a diameter of 4.9 mm must be arranged where holes need to be drilled. It is recommended to use CorelDRAW-x4 version for this step.

2. Export the arranged CorelDRAW file as a PLT file, then import it into Wentai engraving software, and use a cutting plotter to engrave the graphics. The engraving material generally uses sticky notes. It is recommended to use reflective film. The texture effect produced by the membrane is better, but the price and cost are relatively high.

3. Remove the post-it note with the engraved content except the words, and stick the text part on the aluminum-plastic board. Generally, black 3mm aluminum-plastic board is used for electronic light boxes.

4. Drill holes according to the circle position arranged in the first step. Note: the diameter of the LED light is 5mm and 3mm. It is better to use 4.9mm and 2.9 drill bits when drilling.

5. Plug in the lights, pay attention to the positive and negative poles of the lights. After the lights are plugged in, use an LED electronic light box tester to test whether all the inserted lights are on. Then use a glue stick or three-second glue to seal all the lights. The small lights are fixed on the aluminum-plastic panels, which also play a waterproof role.

　

6. Wiring, connect the small LED lights of each channel in series, and then use an LED electronic light box tester to check the resistance of each channel, and record the resistance of each channel. The current of each channel should be controlled between 13-18 mA. If the current is too large, it will easily burn out. If the current is too small, the LED light will not be bright enough.

7. Connect the controller and follow the circuit instructions on the controller. Test with 220V alternating current for about 5 minutes. Disconnect the alternating current and gently touch the resistor with your hand. If the resistor is hot, it means that the current in this circuit is relatively large and the resistor needs to be increased.

8. Encapsulation. Make sure that the above steps are ok. Use self-spraying paint to spray the lamp feet of the electronic lamp. This step is to pre vent short circuit between the lamps and waterproof. After the paint is dry, Just use the special wrapping for F-type light boxes to wrap the front and back plates.

　

In the above introduction, the editor introduced the price and production steps of electronic light boxes in detail. We can understand the electronic light boxes The price is very cheap, good quality and low price. Electronic light boxes can also be called electronic signs. They are super bright. In the dark night, we can see the shining electronic light boxes from a long distance away. They are the most effective way to attract customers. Moreover, electronic light boxes save electricity, energy, and are environmentally friendly. , can be seen in many high-end restaurants, Western restaurants or beauty and bodybuilding, fitness and entertainment places.

Light box: Simply put, it is a billboard; signs such as a company, a bank, or a hotel can be called light boxes, and their main function is to provide Advertising companies, products, things, etc. have advertisements on them to play a role in publicity; for example, all advertisements and signboards seen on the street can be said to be a type of light box.
The advertising design of the light box is mainly to highlight the content of the advertisement. The basic requirement of the cover design is to be harmonious and directly highlight the central theme of the advertisement to achieve the effect of widespre ad advertising (you can go to the street to see it) How are related light box advertisements made?);
There are no specific regulations on what color words to use on the specific light box cards, as long as you design what you think is good and what your boss thinks Whatever is good and applicable will do; the content of the design depends on what you want to design. Since you didn’t mention it above, I can’t explain it to you;
It’s all typed by hand. I hope it can be helpful. Hope to adopt,,,,,,