创意广告灯箱设计作方法

How to make an advertising design lightbox renderings? LED light boxes are suitable for use in small outdoor areas, but it depends on the occasion you use them. LED light box: suitable for popular outdoor stores, companies, websites, product displays, exhibitions and event promotions. LED light box production process: 1. Working principle of making LED characters 1. Create a new text symbol 2. Open the software 3. Modify the character font, font size and other attributes. 4. Switch the frame or line spacing. 5. Adjust line spacing by removing or adjusting the line spacing of characters. 6. Use images or graphics. 7. Rotate the text to form a new text image. 8. Through links, adjust the size, shape, color and position of characters, and you can adjust the size, shape, color and position of images to achieve harmony. 9. Add some graphics or artistic patterns. I added something else to the picture, a small QR code written under the text, without writing the first position. 10. Guide users to purchase products through links. 11. Show the value and essence of the product and guide users to purchase genuine features and discounts.

The making method of a homemade advertising light box is as follows:

1. Design: Make the size, color and font of the light box according to the required design requirements Changes in the primary and secondary arrangement of pictures and texts, and placement in horizontal and vertical directions. In addition, the brackets must be formulated at the installation site, and the size, font, and color of each character should be calculated based on the design, and the characters can be searched.

2. Keel: generally hexahedron.

3. Angle iron: If possible, you can process it by yourself. If you have no conditions, you can process it externally.

4. Wood: Use 2×2 cm square wood for nailing.

5. Cutting materials: four pieces each of length and width, apply white latex to paste and nail them on. The floor cabinet is made of aluminum alloy, and the height, width and length dimensions remain unchanged. Saw it at a 45 degree angle and connect it with a plug-in.

6. Andon: Generally, two or three fluorescent tubes are used. 1 meter long lamp, use 2 meters or more light box. 30W lamp, placed in a light box above 1 meter. The thickness is generally 20-25 cm.

7. Upper board: When nailing small nails, use an electric drill to drill a small hole first, otherwise the hard nail will crack. Just nail it on the edge. If it is more than one meter long, just nail three or four. Can. Only 4 nails are needed for the wide side panel, and holes are drilled on the side to pass the wires through.

8. Aluminum strip: Use 20×20MM aluminum angle, the length and width are 2mm larger than the upper plexiglass plate. The aluminum angle head is sawn at a 45° angle, and the screws are nailed to the 20MM thick side, and the front includes regular script. The nails are never visible.

9. Paste organic words: Arrange the words according to the design on the surface of the light box and lightly grid them, straighten the words, and then paste them with organic glass glue. There are two methods of pasting, one is Apply drops of organic glue. Use another medical needle to suck up the organic glue and gently inject the edge. The second is better than the first. Check to see if there are any typos, missing words, reversed words, check whether each word is stuck firmly, and whether there are any missing words.

10. Cleaning: Use a small piece of clean cloth, dip it in some water, and then squeeze some toothpaste to wipe it evenly. After wiping it evenly, use the cloth to dip it in some water, and wipe it over a large area. It will not cause too much water. Just wet the cloth.