Advertising inkjet cloth is pasted on the wall with 3M glue, chloropre ne glue, and SBS glue.

Glue is the intermediate that connects two materials. It mainly appears in the form of water medium and belongs to the fine chemical industry. It is classified based on the bonding material, physical form, hardening method and material to be adhered.

Common types include instant glue, general-1203 quick-drying glue-ethyl cyanoacrylate strong instant glue, epoxy resin bonding type, anaerobic glue, UV glue curing glue, hot melt glue, Pressure sensitive adhesive, latex, etc.

Extended information:

Under the condition of using the cover type, glue and sealant should be used in a certain environment. Working conditions have an important impact on bonding performance. In terms of usage conditions, Xianyuan has stress conditions, environmental temperature and humidity, chemical media conditions, and outdoor conditions.

In a water-based environment, the chemical component polymer in glue, such as vinyl acetate in white glue, is a petroleum derivative and is a round particle with a particle radius generally between 0.5 and 5 μM. The bonding of objects is achieved through the pulling force between the polymers in the glue.

When carrying out decoration construction, many kinds of auxiliary materials are often used. Among them, mesh cloth is widely used. The types of mesh cloth are: There are many, and the uses will be different. So where is mesh cloth generally used? Let’s learn it with the editor below.
Where are mesh cloths generally used?
1. Mesh cloth is made of medium-alkali or alkali-free glass fiber yarn as raw material, and has been treated with alkali-resistant polymer anti-emulsion. A new alkali-resistant product of soaked coated glass fiber. Mesh cloth has the advantages of alkali resistance, flexibility, high tensile strength in the longitudinal and latitudinal directions, etc., so it is often widely used in the insulation, waterproofing, crack resistance and other construction of interior and exterior walls of buildings.
2. Mesh cloth has the characteristics of good chemical stability, high strength, light weight, good dimensional stability, strong impact resistance, insect protection, fire pre vention, heat pre servation, etc., so it is favored by the majority of consumers. favorite. There are many kinds of mesh cloth, including: alkali-resistant GRC fiberglass mesh cloth, alkali-resistant wall mesh and stone mesh cloth, marble back-mesh mesh cloth, etc.
3. Mesh cloth is generally used in cement, gypsum and walls. Mesh cloth can strengthen the skeleton materials of cement products, reinforced plastics and rubber products, thereby pre venting cracks in the wall. Because mesh cloth is stronger and more durable than ordinary cloth, mesh cloth is often used in the advertising industry, such as advertising on the walls of high-rise buildings.
4. When decorating a new house, if there are relatively large seams at the intersection between the beams and the load-bearing walls, then mesh cloth needs to be used to solve them. If a house is built with brick walls or sand-gray walls, the walls of the house are prone to cracks. At this time, mesh cloth can be used to repair them, thereby delaying the cracks.
5. When the cement mortar on the base of the wall appears to have sand falling off, mesh cloth can be used to help repair it. When cracks appear on the wall where different materials meet, mesh cloth can also be used to help repair it. The use of mesh cloth can better protect the wall surface and pre vent or delay the occurrence of cracks in the wall. The time of cracks will generally be delayed by two years.
6. The surface layer of the external wall insulation wall uses cement and additives as cementing materials, and alkali-resistant glass fiber mesh cloth is used as a reinforcing material to form a protective cover outside the insulation layer. This solves the problem It eliminates the generation of micro-cracks during the solidification process of the cement polymer slurry, ensuring that the plaster surface layer has no cavities, cracking, and falling off, and avoids damage to the insulation layer due to adverse weather conditions. Research shows that alkali-resistant glass fiber mesh can increase the tensile strength of cement polymer mortar by more than 3 times, the flexural strength by more than 4 times, and the impact strength by more than 20 times, which has a significant impact on improving the performance of the insulation system. Therefore, the exterior wall insulation system must be pasted with alkali-resistant glass fiber mesh.
7. When constructing external wall insulation, mesh cloth can be used outside the insulation layer. The mesh cloth will form a protective cover outside the insulation layer, thus avoiding the need for cement. Small cracks will appear in the polymer slurry during the solidification process. In addition, the plastering surface layer will not appear cavities, cracks, falling off, etc., thus avoiding damage to the insulation layer due to harsh weather.
8. Mesh cloth has a wide range of uses, including the following aspects:
(1) On wall reinforcement materials (such as fiberglass wall mesh, GRC wall panels, EPS interior and exterior wall insulation boards, gypsum boards, etc.
(2) Reinforced cement products (such as Roman columns, flues, etc.)
(3) Granite. , special mesh for mosaic, marble back mesh
(4) waterproof membrane cloth, asphalt roof waterproofing
(5) skeleton material for reinforced plastic and rubber products. .
(6) Fireproof board.
(7) Grinding wheel base cloth.
Geogrid for road pavement. />
(9) Construction caulking tape, etc.
There are many types and uses of mesh cloth, so when purchasing mesh cloth, you should base it on your actual conditions. Choose according to your needs. The above is a detailed introduction on where mesh cloth is generally used. I hope it can provide some help for everyone's decoration.

Commonly used advertising materials include: PVC board, KT board, cardboard, cold board, Chevron board, PP sticker, self-adhesive sticker, blister light box, ultra-thin light box, metal, gold plating Film, wood, crystal board, Chevron board, inkjet cloth, 520 specification cloth, 550 specification cloth, giant dragon cloth, black tape, car sticker, photo paper, X display rack, roll-up banner, mesh display rack, Information rack.

1. PVC board:

It is mostly used in advertising light box panels and is used to make lottery boxes for some activities. There are two types: transparent and opaque.

2. KT board:

Used to frame photos. Photos can be framed on both sides and made into billboards.

3. Cardboard:

It is used to frame photos. It can only be mounted on one side. It has high density and can be used for a long time.

4. Cold plate:

Used to frame portraits. It can be mounted on both sides. It has high density and can be used for a long time.

5. Chevron board:

Generally used to engrave logos or baffles, specifications and dimensions: 120CM*240CM.

6. PP stickers:

Generally used as trademarks, affixed to packaging boxes, and used as price tags.

7. Self-adhesive stickers:

Commonly used for burning text, single-sided adhesive stickers, affixed to the car body and glass.

8. Blister light box:

Commonly made of PVC materials and photos or stickers, and can have built-in luminous lights.

9. Ultra-thin light box:

Usually made of aluminum alloy frame, PVC material and photo screen.

10. Commonly used materials include:

Metal, gold-plated film, wood, crystal board, Chevron board

11. Inkjet printing Cloth:

Ordinary inkjet cloth is commonly used. The disadvantage is that it is thin and easy to tear, so it is suitable for temporary and short-term use.

12. 520 gauge cloth:

The thickness is not bad and the coloring ability is not bad.

13. 550 specification cloth: It is thicker than 520. It is generally used in outdoor advertising and is used for a long time, but it will be heavier.

14. Giant dragon cloth:

This is commonly used in the market. Giant dragon cloth and 520 cloth look similar

15. Black tape:

p>

Generally, inkjet printing cloth is white. This kind of cloth is black, more expensive, less used, but high-end.

16. Car body stickers:

Mostly used in car body advertising and affixed to the ground.

17. Photo paper:

The material is thicker and can also be used on the X display stand.

18. X display rack:

The specifications are generally 60CM*120CM. 80CM*160CM

19. Roll-up banner:

The specification is generally 60CM*180CM. 80CM*200CM

20. Net display rack, information rack

Reference: Baidu Encyclopedia-Advertising Materials