pvc塑料板广告牌怎么固定

To stick PVC boards, foam double-sided tape is generally used, which plays a temporary role and fixes the object in a short time. Finally, glass glue is applied to achieve the desired effect. The final long-term fixed effect is that in the advertising industry, these two are used together as standard! Badger glue, AB glue, 495, and 1946 instant glue are all acceptable!
Before choosing plastic glue, we must first clarify the following issues.
1. Determine the material. Before choosing glue, we must first determine what plastic is being bonded. There are ABS plastic, PP plastic, PE plastic, PS plastic, PC plastic, PA plastic, etc. For example:
PP plastic: JL-655PP/PE plastic special glue, JL-6282 soft PPPE plastic special glue
PE plastic: JL-655PE plastic special glue, JL-6282 soft PPPE plastic special glue
ABS plastic: JL-1608ABS special glue for plastic bonding
PS plastic: JL-702PS special glue for plastic bonding
PC plastic: JL-6287PC special glue for plastic bonding
PVC Plastic: JL-268PVC special glue for plastic bonding, JL-6284 special glue for hard PVC plastic
PET plastic: JL-6088PET special glue for plastic bonding
PA plastic: JL-6288 special glue for nylon (PA) Plastic glue
PMMA plastic: JL-6180PMMA special glue for acrylic bonding
2. Determine the size of the bonding area. Surface bonding or buckle bonding or other types of bonding. For large areas, it is suitable Use slow-drying glue to leave enough time for you to operate. If the area is small, instant glue is a good choice. Determine whether it is a flat surface bonding. If it is a buckle bonding or sleeve bonding, etc., use glue. Good bonding results can be achieved even if the bonding strength is not very good. For example:
JL-466 Special instant glue for nylon
JL-420AB agent Special instant glue for PE plastic
JL- 406ABPP instant glue for plastic
JL-468 instant glue for rubber and plastic
JL-408 instant glue for PET bonding
JL-495 soft and tough instant glue
3. After confirming the bonding Requirements such as: bonding speed/colloid color/colloid viscosity/high and low temperature resistance/bonding strength, etc. If there are special requirements, a special glue must be used, for example, high temperature resistance is required. /Waterproof/super strong bonding type. For example:
JL-6218 Multi-purpose glue for metal and transparent plastic
JL-6102 Multi-purpose plastic glue
JL-6006 Non-drawing plastic glue
JL -6300 transparent strong all-purpose glue
JL-8260 oily transparent self-adhesive
JL-6213 one-component pearl cotton special glue
JL-6810 high temperature resistant polyurethane adhesive
JL-6283 High-strength PVC|PU transparent plastic glue
JL-218 polyurethane rubber adhesive metal hot vulcanization glue
Advantages
1. Most plastics have strong corrosion resistance and do not react with acids and alkalis.
2. Plastic is cheap to make.
3． Durable, waterproof and lightweight.
4. Easily molded into different shapes.
5． Is a good insulator.
6． Plastics can be used to pre pare fuel oil and fuel gas, which can reduce crude oil consumption.
Disadvantages
1. When recycling waste plastics, classification is very difficult and economically uneconomical.
2. Plastics burn easily and produce toxic gases when burned. For example, when polystyrene is burned, toluene is produced. A small amount of this substance can cause blindness, vomiting and other symptoms when inhaled. PVC burning can also produce toxic gases such as hydrogen chloride. In addition to burning, high-temperature environments can cause plastics to decompose into toxic components, such as benzene. .
3. Plastics are made from petroleum refining products, and petroleum resources are limited.
4. Plastic will not decay even if it is buried underground for hundreds, thousands or even tens of thousands of years.
5. Plastics have poor heat resistance and are prone to aging.
Hope this helps!

If the PVC plastic boards are directly attached to the cement wall, it may not be strong. You should add a layer of isolation board, lay a base, and use structural adhesive. Stick.