Latest news on billboard installation
本文目录一览
It takes 1-2 days for personnel and machinery, foundation positioning flanges, ground bolts, and rebar to arrive at the site.
Rebar processing and foundation trench excavation, notify Party A for acceptance, 1-2 days.
After the pit is accepted, the underlying layer, steel bar binding, positioning flange and formwork will be installed, which is expected to take 2-3 days.
C25 concrete was poured in two times to complete the foundation and perform concealed backfilling and curing, which lasted 2-3 days.
It takes 4-5 days to arrive at the site for anti-corrosion treatment, cutting and welding of the brand steel.
The columns come in, Party A accepts and pays, and the crane unloads the goods, which is completed in one day.
The crane assists in the assembly of the cards, and security personnel supervise the details, which lasts 2-3 days.
It takes 3-4 days to complete the welding support of the signboard and install the galvanized panels.
Security inspectors will review the welds to ensure there are no hidden dangers, it will take 1-2 days.
The billboard will be fully inspected and accepted. Once qualified, it will be hoisted and installed, and will be completed within 1 day.
During the installation process, Party A or the authorized supervisor must supervise the angle, visual level and verticality of the billboard throughout the entire process for 1 day.
After the installation is completed, seal the anchor bolts with concrete and stone bricks to pre vent corrosion and theft. It is expected to take 1-2 days.
Finally, the billboard was installed, announcing that the project was fully completed.
- 壹、The construction progress of the anti-aircraft artillery advertising anti-aircraft artillery billboard project is clear
- 贰、Can billboards be installed on the exterior wall of the balcony on the second floor?
- 叁、Is it legal to install billboards at the entrance and exit of a building?
After the signing of the contract, Party B's technical team immediately started a series of pre paratory work. First, they worked with Party A to determine the center position of the anti-aircraft gun billboard to ensure accuracy. Then, Party A will inspect and accept the three connections and one leveling work to ensure that the construction foundation is stable. Technicians also need to coordinate the purchase of required raw materials and rental machinery, and at the same time explain important matters during the construction process to Party A. These pre parations are expected to take 2-3 days, but are not included in the construction period stipulated in the contract.
When the pre paration work is completed, the construction is on track. The following is the specific construction schedule:
It takes 1-2 days for personnel and machinery, foundation positioning flanges, ground bolts, and rebar to arrive at the site.
Rebar processing and foundation trench excavation, notify Party A for acceptance, 1-2 days.
After the pit is accepted, the underlying layer, steel bar binding, positioning flange and formwork will be installed, which is expected to take 2-3 days.
C25 concrete was poured in two times to complete the foundation and perform concealed backfilling and curing, which lasted 2-3 days.
It takes 4-5 days to arrive at the site for anti-corrosion treatment, cutting and welding of the brand steel.
The columns come in, Party A accepts and pays, and the crane unloads the goods, which is completed in one day.
The crane assists in the assembly of the cards, and security personnel supervise the details, which lasts 2-3 days.
It takes 3-4 days to complete the welding support of the signboard and install the galvanized panels.
Security inspectors will review the welds to ensure there are no hidden dangers, it will take 1-2 days.
The billboard will be fully inspected and accepted. Once qualified, it will be hoisted and installed, and will be completed within 1 day.
During the installation process, Party A or the authorized supervisor must supervise the angle, visual level and verticality of the billboard throughout the entire process for 1 day.
After the installation is completed, seal the anchor bolts with concrete and stone bricks to pre vent corrosion and theft. It is expected to take 1-2 days.
Finally, the billboard was installed, announcing that the project was fully completed.
The entire process is rigorous and orderly, ensuring the high-quality completion of the billboard project.
Billboards usually cannot be placed on the exterior walls of the second floor. According to the relevant provisions of the "Urban City Appearance and Environmental Sanitation Management Regulations", if any publicity or slogan is posted or hung on urban buildings, structures or other facilities without the approval of the city appearance and environmental sanitation administrative department of the city people's government, the city people's government shall The administrative department of city appearance and environmental sanitation shall order corrections within a time limit and may impose a fine of not more than 200 yuan. Therefore, it is illegal to hang billboards on the second-floor exterior walls of first-floor shops without the approval of the relevant departments.
However, if the billboard only occupies a part of the exterior wall of the second floor and does not affect the structure of the building, then the billboard can be placed on the exterior wall of the second floor. However, this requires compliance with relevant building regulations and safety standards to ensure the quality and safety of the billboard.
However, if the billboard only occupies a part of the exterior wall of the second floor and does not affect the structure of the building, then the billboard can be placed on the exterior wall of the second floor. However, this requires compliance with relevant building regulations and safety standards to ensure the quality and safety of the billboard.
The answer is yes, but setting up billboards on the roof requires urban management approval. The specific procedures are as follows:
1. Go to the planning department for approval , mainly whether the location of the advertising words is allowed by the planning;
2. The application form can be obtained from the District 1 Urban Compre hensive Law Enforcement Brigade, the township and sub-district offices of the management responsible unit of the road section under its jurisdiction;
3. The applicant Proof of identity, copy of business license;
4. Proof of consent of the owner, user or manager of non-dedicated facilities and rental agreement;
5. If the interests of neighboring persons are involved, relevant documents must be provided. Written opinions from neighboring stakeholders;
6. Specific location map, floor plan, renderings, plane and elevation layout drawings, with accurate dimensions;
7. Design and production plan for rooftop advertising characters;< br/> 8. The application form and written description of the materials used, materials, and installation settings will have any impact on the building or surrounding residents.
1. Go to the planning department for approval , mainly whether the location of the advertising words is allowed by the planning;
2. The application form can be obtained from the District 1 Urban Compre hensive Law Enforcement Brigade, the township and sub-district offices of the management responsible unit of the road section under its jurisdiction;
3. The applicant Proof of identity, copy of business license;
4. Proof of consent of the owner, user or manager of non-dedicated facilities and rental agreement;
5. If the interests of neighboring persons are involved, relevant documents must be provided. Written opinions from neighboring stakeholders;
6. Specific location map, floor plan, renderings, plane and elevation layout drawings, with accurate dimensions;
7. Design and production plan for rooftop advertising characters;< br/> 8. The application form and written description of the materials used, materials, and installation settings will have any impact on the building or surrounding residents.