Installation and construction of large outdoor billboards
问题
Installation and construction of large outdoor billboards
No qualifications are required. Please consult the local industrial and commercial department for details
[Introduction] A good sign product is not only reflected in the design, materials, technology, and display functions, but also the installation method. A very critical point. The consideration of installation method is inseparable from the production process and installation environment. It must be carefully selected according to the characteristics of the signboard advertising and the installation environment.
01. Adhesive type
Adhesive type has a wide range of applications. Commonly used adhesives include glass glue, AB glue, foam glue, universal glue, sponge glue, double-sided tape, and chloroform. , structural glue, etc. The appropriate adhesive must be selected based on compre hensive considerations such as the material of the advertising sign and the installation environment, dryness and humidity inside and outside, and temperature differences. The most commonly used method of pasting luminous characters is to install them with glass glue. For example, resin characters, borderless characters, and injection molded characters can all be installed with glass glue.
02. Hanging and fixed type
This is a method used for some hemming signs that are large in size, heavy in weight, and cannot be installed with foam filling and pasting. First determine the punching point, use an impact drill to drill the hole, then screw on the rubber plug and self-tapping screws. When using only one screw, you must drill a hole in the middle of the upper edge of the sign to keep it horizontal, and then fold the sign and hang it. On the screw, after adjusting the position, seal it with glass glue around it to fix it.
03. Paste and hanging type
This is also used for some folding signs. If the wall foundation is marble, glass, stainless steel, etc., drilling is not allowed. , and the installation wall is strong and flat, then this method is most suitable. First, accurately measure the installation position to pre vent the sign from being installed crookedly. Use AB glue to stick organic edge strips or angle aluminum and other materials to the wall. Then fold the sign and hang it, fine-tune the position, and fix it with glass glue.
04. Suspended type
The hanging chain materials used in this method mainly include iron chains, steel ropes, fishing wire, cable ties, etc., depending on the indoor and outdoor Use suitable lifting materials according to the environment, signage weight and other special requirements. The tag light box uses this installation method.
05. Driving screws inside the base plate
This installation method is suitable for signs on metal bottom boxes, such as blister characters and flat luminous characters. During installation, First, drill holes in the mounting wall and the marking metal bottom plate according to the measured size, fix the bottom box on the mounting wall with screws, and then install the word case on the bottom box with screws.
06. Screw mounting type
Screw installation is to weld a screw of a certain length on the marked bottom plate. There are corresponding mounting holes on the installation wall. During installation, the marked screw can be directly inserted into the corresponding mounting hole to fix it. The purpose of screw installation is to keep the sign at a certain distance from the installation wall. Among luminous characters, backlit characters are basically installed using screws, which takes into account its own luminous characteristics.
07. Buried type
It is suitable for situations where the ground is a soil structure and the sign does not need to be moved. According to the size and height of the sign, determine the size of the pit and use concrete. How many. For example, most publicity boards and guide boards are installed in this way.
08. Floor-standing type
According to the design requirements, just place the logo in the corresponding position. Most metal double-sided characters are installed in a floor-standing manner.
09. Pull-out screw fixed type
This method is suitable for situations where the ground foundation is a concrete structure and the signs do not need to be moved, such as street signs and parking signs. Use this method more often. Web link
[Conclusion]: The above nine are common installation methods. In fact, the installation method of signage production in advertising design and production is very flexible and depends on the actual installation situation. For some signs with complex installation environments and their own institutions, it often requires a combination of multiple installation methods to complete the installation!
以上为是众多网友友对《Installation and construction of large outdoor billboards》的相关解答,希望对您的问题有所帮助。