店内广告牌设计作

In Qingdao, door-to-door billboard designers include: Aiske Door-to-Door Billboard Design Co., Ltd., Jieosmen Head billboard design, Qingdao Baolun door billboard design, Sanxiong Aurora door billboard design, Qingdao Feishang door billboard design. The specific introduction is as follows:

1. Eske Doorhead Billboard Design Co., Ltd.:

Service introduction of Eske Doorhead Billboard Design Co., Ltd.: The luminous characters designed by Esko's door sign have a long service life, receive more praise from customers, and have a larger customer base. It has become one of the professional manufacturers of large-scale LED lighting products in China, providing efficient, energy-saving, high-quality and stable LED series products for lighting and lighting projects at home and abroad.

2. Jieosi door billboard design:

Jieosi doorway billboard design service introduction: lighting of Jieosi luminous signage The engineering technology is relatively compre hensive and it has good after-sales service. Its services include security monitoring system research and development and construction, new energy energy-saving engineering renovation and installation services, etc. Provide customers with efficient and safe one-stop professional services from project planning and design to raw material procurement and production, smart lighting science and technology, engineering construction and maintenance.

3. Qingdao Baolun door billboard design:

Qingdao Baolun door billboard design service introduction: Qingdao Baolun door billboard design The luminous signage technology is relatively advanced and the customer positioning is high. It is positioned as a high-end outdoor light environment integrated service provider in China. It focuses on the outdoor lighting and lighting engineering industry. It has professional contracting qualifications for urban and road lighting projects and a special project for urban and lighting engineering design. level qualification.

4. Sanxiong Aurora door billboard design:

Sanxiong Aurora door billboard design service introduction: Sanxiong Aurora door billboard design Luminous signage has a good reputation in the industry and has a good reputation among users. At the same time, its sales volume is also relatively leading in the industry and it has won many honors. Obtained the first-level qualification for professional contracting of urban and road lighting projects in 2017.

5. Qingdao Feishang door billboard design:

Qingdao Feishang door billboard design service introduction: Qingdao Feishang door billboard design luminous There are many types of word sign lighting projects, and users have greater selectivity. It has relatively advanced production technology and integrates R&D, production, sales and service. Committed to the research and promotion of LED series products.

Preparation time

First introduce the materials used in production (all materials are available in Electronic City)

●Micro switch (2-3 yuan each)

●LED light (color: white, blue, green, red, light, yellow, automatic flashing, etc.. except automatic flashing , all colors are available in large heads and thin heads) (ranging from 1 to 5 yuan)

●Battery (Silver-zinc button battery has two advantages: one is easy to hide in the model; Each chip has 3V current

1. Make a switch

Step 1: First select a suitable micro switch (of course the size is smaller than the model part)

Step 2: Since the model glue is thick, use a tool to thin the inside first, and open a gap at an appropriate position to facilitate the exposure of the switch button

Step 3: Connect the two wires to the switch respectively Positive and negative poles

Step 4: While checking whether the switch is correctly hidden in the parts, try to see whether the parts can be assembled correctly

2. LED light connection

Step 1: Connect the two wires to the positive and negative poles of the LED respectively (usually long is positive and short is negative, but it is not a rule, so it is best to test it)

Step 2: Use tape to tie the wires Wrap it well to avoid short circuiting the wires (it doesn’t matter what kind of tape you use, the voltage is only 3V anyway)

Note: If used in humid conditions, for safety reasons, please use electrical tape

< p>3. Place the LED light

The gun head is made of a thin LED light

Step 1: Cut off the joint of the gun head and open its position

Step 2: Since the tail of the LED lamp head is wider and the parts are not that wide, a groove must be carved in the part to hide the light

Note: How to hide the light is important It depends on the space of the component itself, so there is no rule, just adapt to your circumstances!

The space for the sighter in the gun is larger, so I will use a large-head LED lamp to make it

Step 1: Same To do this, cut off the front connector and open its position

Step 2: Bend the LED lamp legs into a shape that can be fixed on the component. Be careful, the positive and negative poles must be separated, otherwise they will short circuit

Step 3: Place the wires in a good position and cut out the capsule in the middle for connection purposes

Note: If you have little experience and cannot cut out the middle joint (because it is easier to cut) , you can use two wires to connect them separately

Step 4: Connect the wires, first test whether the positive and negative poles of the two LEDs are connected incorrectly (if they are connected incorrectly, the ends should be thin and the fruit will not stick) )

4. Choose a location to place the battery

It is not easy to choose an appropriate location because there is not much space. This time I chose a smaller size battery (CR1220) That’s the kind used on the PGZeta Gundam head.

Step 1: As usual, cut off all the useless parts, and choose the location according to the condition of the parts

Step 2: Of course, we have to try to see if we can put the battery into that space

5. Make a battery box

Since the battery boxes available on the market are relatively large in size, we have to tailor them The materials used for custom-made production are model rubber sheets purchased in general model stores

Step 1: Cut the rubber sheet into a size larger than the battery, and cut out multiple strips for pre paration

Step 2: There is no pre cise measuring tool, so stand up and see if the height is appropriate

Step 3: Use model glue and glue strips to build a concave character, and then put Paste the panel and make the shape in the middle of the picture (cut off the excess)

Step 4: Make a hole at the top and bottom respectively for placing the iron piece

The iron piece used this time is the buckle usually used when buying socks. This iron piece is very easy to use, easy to bend and not easy to break.

Step 5: Bend the iron piece into a Z shape for easy placement. Enter the pre viously pre pared position

Step 6: Make the front and rear sides into the shapes in the picture.

Note: Because the negative electrode of this battery is at the top and the positive electrode can be connected below or on the left and right sides, but if placed on the left and right sides, there is a chance of contact with the negative electrode, so it is recommended to place it below

6. Connect the battery box

Step 1: Place the battery box in advance The position is arranged and the size is just right! (In fact, the size has been measured when making the battery box)

Step 2: Connect the wires, first connect the wires on the outer edge of the LED (connect the negative electrode to the battery (the negative terminal of the battery box)

Note: In fact, you can also connect the positive terminal of the LED fruit side to the positive terminal of the battery box, as long as you do not connect the positive terminal to the negative terminal.

Step 3: Connect the Just connect the positive terminal of the battery box to one of the wires on the switch, because the switch has no positive and negative terminals

Step 4: It’s a cliché, just test it after connecting it!

Step 5: Twist the wires of the switch into an S shape. Because the gun handle is movable, the S shape can provide sufficient elasticity. Of course, it depends on the space of the parts.

Step 6: Put the gun together. , and then try to see if the movement of the gun handle will cause poor circuit contact. If so, of course make corrections

7.. Make the battery box cover

I believe everyone has one Have some modeling experience and make a suitable battery box cover!

1. The two billboards in the store design should be reasonably divided by dividing lines to distinguish different contents while maintaining the overall beauty and coordination.
2. In terms of color matching, the two billboards should use contrasting colors to create a visual impact and make the advertising content easier to attract customers' attention.
3. Advertising signs are an important outdoor media for conveying advertising information. It is not limited to specific forms of advertising, but covers all outdoor display facilities used for publicity.