问题描述：
问题解答：
我来补答You need to pay attention to the following two points:
1. Be sure to smooth it when pasting, because generally photo inkjet printing will pass through the film, you can use a Put a wet veil on it and slowly smooth it out, but you must straighten the photo inkjet and try to keep a little distance from the target object. It can't be too close or too far. If it's too close, it's easy to stick. If it's too far, it's not easy to smooth. You will master it if you practice it a few times.
2. When pasting the photo inkjet painting, you can use a small amount of detergent mixed with water and put it in a mineral water bottle. Make a hole in the lid and spray it on the surface where the adhesive-backed inkjet painting is to be pasted. When pasting, pour the water from the inside. Just drive him out. When applying spray-painted car stickers, you can use a damp rag to moisten the surface before applying them.
Extended information:
Inkjet printing essentials:
1. PP film
It is also commonly known as The poster has exquisite glue and high pre cision, but it does not come with a self-adhesive surface on the back. Customers can use double-sided tape to stick it on the wall and can be used multiple times.
2. The difference between adhesive backing
and PP film is that it has its own adhesive surface. Customers can tear off the back film and stick it on the wall) 3. Photo paper (also commonly known as poster, exquisite photo paper, high pre cision, no self-adhesive surface.
4. Light box film
Exquisite inkjet printing in front of the light box, it is different It is not used for inkjet printing on our usual signboards, but is used for inkjet printing on McDonald's menu light boxes. It has the characteristics of exquisite images and moderate light transmittance.
5. Ordinary boards with adhesive backing
It is to stick the adhesive on a special KT board similar to foam board, and then add edges around it to form a picture frame. This material is lightweight and can be used for company decoration and exhibition display.
6. The difference between high-quality glue-backed boards and ordinary boards is that there will be no bubbles on the board after long-term use.
7. Silk cloth
p>Silky-like inkjet material, used for romantic and elegant display occasions, such as clothing stores, etc.
8. Oil canvas
Used. A more romantic and elegant exhibition venue with a certain oil painting texture, which can be used for wedding photography, etc.
9. Transparent adhesive
Another type of adhesive, but this one. The material is transparent and is mostly used for door postings. This material is noble and elegant, and is a good choice for displaying the company's image.
Pasting is the simplest way to install outdoor advertising. It does not require screws. It only requires people to use double-sided tape, sponge tape, glass glue and other various glues to paste it. That’s it. It should be noted that the installation environment is different, the advertising retention time is different, and people need different glue. For example, if the environment where outdoor advertisements are installed is relatively humid, people should choose water-resistant glue, otherwise the advertisement will fall off within a day after being pasted, which is not good.
2. Outdoor advertising installation method: hanging
Hanging is divided into sticky hanging type and hanging fixed type. The former is suitable for marble, glass, stainless steel and other wall bases. After people install the advertisement, they use AB glue Stick the edge strip or angle aluminum of the advertisement on the wall. If the advertisement is not flat, adjust the position, and finally fix it with glass glue to complete the installation. The latter is suitable for folding signs, which are large in size and heavy in quality. In the case of foam filling and pasting, this installation method requires drilling holes with an electric drill. After drilling the holes, use screws to tighten the advertisement.
3. Outdoor advertising installation method: pre set billboard installation
Preset billboard installation may seem strange to people based on the name, but when it comes to billboards on buses, you may understand. The default installation of billboards is at a fixed position. People only need to make suitable advertisements according to the length, width and height of the billboard to install them. It is very simple.
4. Outdoor advertising installation method: hanging type.
The installation of suspended advertising requires the use of tools such as iron chains, steel cables, fishing wire, cable ties, etc. As for which tools to use, people need to decide based on the indoor and outdoor environment and the weight of the signage production.
5. Outdoor advertising installation method: buried.
Buried advertisements are very common, such as bulletin boards, guide signs on highways, etc. This kind of installation is suitable for the ground with earthen structures.
