Aluminum plastic board billboard edge metal
本文目录一览
- Is it better to have titanium hemming or aluminum-plastic plate hemming?
- Who can give me some advice on how to wrap aluminum-plastic panels?
- Problems with wrapping aluminum-plastic panels on storefronts. Help!
Titanium hemming is better. Nowadays, aluminum alloy is more common in the market. The thermal insulation performance of broken bridge aluminum alloy is also relatively superior. Glass can be used in 5+12+5, and the sound insulation effect is also very good. Using aluminum alloy .
First paragraph: Hemming of aluminum-plastic panels is a commonly used method when using aluminum-plastic panels. It can make the aluminum-plastic panels more Stable and more beautiful. First of all, we need to pre pare the tools and materials we need to use in advance, including aluminum-plastic panels, cutting knives, scrapers, edge pre sses, etc. Next, measure the size of the aluminum-plastic panel and cut it with a knife. Then put the cut aluminum-plastic panel into the edge pre ss. Use the scraper and edge pre ss to wrap the edge of the aluminum-plastic panel in the aluminum sheet. It is more stable and firm.
Paragraph 2: Some techniques that need to be paid attention to during the hemming process. First of all, you must pay attention to safety when using a cutting knife, keep the blade sharp, and pay attention to the pre cise cutting line when cutting to avoid irregular edges. During the edge wrapping process, use a scraper to smooth the surface of the aluminum-plastic panel, and use an edge pre ss to fix the aluminum-plastic panel and aluminum sheets. Make the surface of the aluminum-plastic panel as smooth as possible without blisters or dents. Phenomenon.
Paragraph 3: The advantages of aluminum-plastic panel edging are its beautiful appearance, durable material, and easy cleaning. But at the same time, it should be noted that the aluminum sheets at the edges of the aluminum-plastic panels must be installed flat and pre ssed tightly to ensure that they are not easily deformed and have stability. During the installation of aluminum-plastic panels, you must also pay attention to safety to avoid accidents. In the process of using aluminum-plastic panels for edging, we must operate according to the actual situation, and perform polishing, glue treatment, etc. as needed to make the aluminum-plastic panels more beautiful and stronger.
Paragraph 2: Some techniques that need to be paid attention to during the hemming process. First of all, you must pay attention to safety when using a cutting knife, keep the blade sharp, and pay attention to the pre cise cutting line when cutting to avoid irregular edges. During the edge wrapping process, use a scraper to smooth the surface of the aluminum-plastic panel, and use an edge pre ss to fix the aluminum-plastic panel and aluminum sheets. Make the surface of the aluminum-plastic panel as smooth as possible without blisters or dents. Phenomenon.
Paragraph 3: The advantages of aluminum-plastic panel edging are its beautiful appearance, durable material, and easy cleaning. But at the same time, it should be noted that the aluminum sheets at the edges of the aluminum-plastic panels must be installed flat and pre ssed tightly to ensure that they are not easily deformed and have stability. During the installation of aluminum-plastic panels, you must also pay attention to safety to avoid accidents. In the process of using aluminum-plastic panels for edging, we must operate according to the actual situation, and perform polishing, glue treatment, etc. as needed to make the aluminum-plastic panels more beautiful and stronger.
Answer:
1. There are many ways to wrap the pillars. For the door pillars, you can directly wrap the keel without using a wooden board as the base. After welding is completed, the aluminum-plastic plate can be rolled into an arc like two semi-circles butted together; for indoor pillars, the plywood needs to be rounded in advance, and then the aluminum-plastic plate material after arcing is pasted. After all, the aluminum-plastic plate is a kind of facing. If the material and base material are not well made, it will definitely not be able to expre ss the effect well.
2. If wooden plywood is used as the base and aluminum-plastic board is attached to the outside, it is recommended to use a plate thickness of 3 mm and an aluminum thickness of 0.15 or 0.20 mm. Structural products, the price difference of such products should be around 60 yuan/square meter. This is the price of pure materials. If other auxiliary materials and accessories are included, the labor and material package price can be 200 yuan/square meter. We will confirm the quotation. 300 yuan is considered reliable if you pay for labor and materials.
3. If dry hanging columns are used without plywood as the bottom, then the aluminum-plastic plate must first be 4 mm thick, with strength and hardness, and other materials To do roll processing, steel, welding, etc., this method will be more expensive in terms of materials and labor. At this price, the decoration boss quoted 300 yuan/square meter, which is acceptable.
4. Aluminum for indoor use Plastic board materials generally last for 3-5 years without any problems for the hand. Now the production process of this product is relatively highly mature, and the products circulating in the market are not that bad. The emphasis is on the effect, and the cheap ones are definitely It is thin, and thin aluminum-plastic panels may be worse in terms of strength, hardness and impact resistance. The worst and thinnest aluminum-plastic panels are 60-80 yuan/piece, that is, Pythagorean potatoes are less than 30 yuan/square meter. .
5. Compre hensive suggestion: take the five-year lease seriously, use wooden plywood as the bottom, and stick 3mm aluminum-plastic panels on the surface. The labor and material package is 200 yuan/square meter. You can talk to the boss and do it well at the same time. On-site monitoring is enough to ensure construction quality.
1. There are many ways to wrap the pillars. For the door pillars, you can directly wrap the keel without using a wooden board as the base. After welding is completed, the aluminum-plastic plate can be rolled into an arc like two semi-circles butted together; for indoor pillars, the plywood needs to be rounded in advance, and then the aluminum-plastic plate material after arcing is pasted. After all, the aluminum-plastic plate is a kind of facing. If the material and base material are not well made, it will definitely not be able to expre ss the effect well.
2. If wooden plywood is used as the base and aluminum-plastic board is attached to the outside, it is recommended to use a plate thickness of 3 mm and an aluminum thickness of 0.15 or 0.20 mm. Structural products, the price difference of such products should be around 60 yuan/square meter. This is the price of pure materials. If other auxiliary materials and accessories are included, the labor and material package price can be 200 yuan/square meter. We will confirm the quotation. 300 yuan is considered reliable if you pay for labor and materials.
3. If dry hanging columns are used without plywood as the bottom, then the aluminum-plastic plate must first be 4 mm thick, with strength and hardness, and other materials To do roll processing, steel, welding, etc., this method will be more expensive in terms of materials and labor. At this price, the decoration boss quoted 300 yuan/square meter, which is acceptable.
4. Aluminum for indoor use Plastic board materials generally last for 3-5 years without any problems for the hand. Now the production process of this product is relatively highly mature, and the products circulating in the market are not that bad. The emphasis is on the effect, and the cheap ones are definitely It is thin, and thin aluminum-plastic panels may be worse in terms of strength, hardness and impact resistance. The worst and thinnest aluminum-plastic panels are 60-80 yuan/piece, that is, Pythagorean potatoes are less than 30 yuan/square meter. .
5. Compre hensive suggestion: take the five-year lease seriously, use wooden plywood as the bottom, and stick 3mm aluminum-plastic panels on the surface. The labor and material package is 200 yuan/square meter. You can talk to the boss and do it well at the same time. On-site monitoring is enough to ensure construction quality.