The warranty period of aluminum plastic board billboards is generally several years.
- ＋▂＋What are the bracket materials for the billboard above the store entrance? Can the aluminum-plastic panels outside be replaced with wooden boards?
- ˙﹏˙What material should outdoor billboards be made of if they want to last longer?
- ∩０∩There are several ways to make door signs and what materials can be used to make them
Wooden boards are not good for use as signboards. They will definitely break down within a year and will not be effective. It would be good to make them into colored tile signboards with iron lettering.
I am from the advertising department. I don’t know where you are from, so I may not be able to help you. You can just contact the advertising department and they will help you solve the problem.
Save money you can’t see yourself. This is true.
The materials of billboards are generally made of: square tubes, angle steel, etc., which are welded. It can include three-dimensional panels, light cloth, blister, car paint, gusset panels, aluminum-plastic panels, etc. It would be better to use angle steel for such a large piece. When embedded parts should be used between the billboard steel structure and the concrete structure, friction expansion bolts are strictly prohibited for anchoring. When special embedded parts are installed unconditionally, other reliable connection measures should be taken, but they must be verified through force calculation and testing to ensure safety. For billboard steel structures attached to floors and walls, when bolts or welds are used to connect to the original house structure, the connecting bolts or welds should be calculated based on the overall overturning resistance of the structure. The calculated stress of the bolts or welds does not Should be greater than the design value of bearing capacity.
The connecting parts between billboards and walls. Wall billboards should be attached to the wall of a house or structure. It should be determined or verified that the wall of the house or structure can reliably withstand the force transmitted by the billboard, and Have necessary safety reserves. The connecting parts of wall billboards can be connected to the embedded parts in the columns or beams of the wall by welding, bolts or anchors. They can also be connected by qualified chemical anchors and planting bars. Friction-type expansion anchors are strictly prohibited. For the wall of an outdoor building, if you are considering using it for one or two years, you can use 3X3 angle steel as the main material. If you are considering using it for three to five years or even longer, use 4X4 angle steel, and add 0.4mm to the finished grid. galvanized sheet (windproof), and then install the picture, there are many auxiliary materials, such as No. 10 round steel, stainless steel edge strips, paint, rivets and welding rods, etc. This kind of steel frame must be maintained regularly after it is completed. The maintenance period depends on the degree of damage. It is usually not more than once a year. In cities with a lot of rain or even acid rain, it should not be more than half a year. The service life of the steel frame will be extended under normal maintenance. A poorly maintained steel frame may not last 5 years if larger materials are used. If you want an accurate budget, it's best to send photos, as installation difficulty may vary. We make steel frames like this all year round.
The price of aluminum-plastic panels is relatively low, there are many colors, and the effect is also There are many comparisons. As the base plate, the aluminum-plastic panel is a composite material that uses chemically treated coated aluminum panels as the surface material, polyethylene plastic as the core material, and is processed on special aluminum-plastic panel production equipment.
As a kind of plate used on the door head, acrylic board can achieve the overall luminous effect through the overall blister process. This kind of door head material has strong three-dimensional effect, high hardness, good insulation and strong impact resistance. It also has impre ssive performance after being exposed to sunlight and rainwater, and it has very good ductility to light.
Fireproof board is a decoration made of siliceous material or calcium material as the main material, mixed with a certain proportion of fiber materials, light orthopedic adhesives and chemical additives, and made by autoclaving technology Material, it is a new type of material that is increasingly used at pre sent. It is widely used in the advertising industry LOGO wall base plate. The price of good quality fireproof board is more expensive than the decorative panel.
The aluminum plate door head is customized as a whole, and the appearance is consistent. The effect of the door head looks more high-end than other door head materials, and the service life is as long as ten years. Secondly, this kind of aluminum plate material has extremely high immunity to seasonal effects and will not cause any negative situations due to temperature changes. Moreover, the dust-proof style of this aluminum plate door head is very popular among major merchants. It is basically No cleaning is required, and it can always look like new, which greatly solves the problem of inconvenient cleaning of the door heads of some commercial buildings.
No more than the following types: spray-painted door heads; aluminum-plastic door heads; glass door heads; color steel gusset door heads; PVC carved door heads, etc.
The characteristics of inkjet door headers are that they are cheap, simple and quick to make, and have a monopoly position in the early advertising signboards. However, they have their own significant disadvantages. Inkjet printing fades quickly, almost a year and a half. It is necessary to replace the door head, so in the modern advertising sign market, the trend is declining rapidly.
The characteristics of the aluminum-plastic plate door head are that it is moderately priced, relatively simple to make, and the color is durable. If it is paired with suitable words and fine construction, the door head sign will become a beautiful sensory picture. In modern signboard production, it accounts for 60% of the market. But the most critical aspect of this type of sign is: materials and construction. Only good materials and good construction workers are enough. The two are the most critical. Otherwise, like many doors on the street, one or two aluminum-plastic panels will fall off due to various reasons. The entire door had to be redone, which was a waste of manpower and material resources
Glass door has the following characteristics: beautiful color, smooth appearance, mid-to-high grade, and one of the most popular types of modern door signs. It occupies an important position and is widely popularized. However, because the price is slightly higher, and the public price of the workers and masters who make this type of door is also high, this new type of door accounts for 30% of the market. (Safety glass is recommended for this type of door)
Colored steel gussets are simple and quick to make, but the effect is average. Due to the material factors, they fade quickly. If the gussets are good, they can be paired with appropriate words. If good results can be achieved, this type of door will become popular.
The characteristic of PVC carved door heads is that the shape of the door heads can be novel and unique, and the design effect is remarkable. Generally, the door heads need to be simple and elegant, so the scope of this type of door heads is small and there are few manufacturers.