How to stick pvc plastic board billboard to glass

HY-308 glue can be used for small areas of PVC material, and HY-T160 glue can be used for large areas.
HY-308 metal rubber glue is mainly used for the rapid bonding of various plastics, rubber, metal jewelry, electronics and other high-end products and wood products with strong adhesion.
HY-T160PP/PE slow-drying glue is mainly used to bond various difficult-to-stick plastic products such as: polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), ABS , nylon, sponge, film, foam plastic, etc.; it also has good adhesion to organic glass, rubber, metal, bamboo wood, fabric paper, especially for the mutual adhesion and cross-bonding of plastics and metal and non-metal materials. Uniquely, it is an ideal adhesive material for industries such as home appliance industry, radio industry, decoration, craft toys, thermal insulation materials, packaging and printing.

What else do you want? What about intensity? If the requirements are not high, you can use transparent silicone glass glue; if the requirements are high, use transparent epoxy resin.

The structural adhesive used in curtain walls can stick PVC pipes to glass;

PVC can be divided into Soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for floors, ceilings and the surface of leather. However, because soft PVC contains plasticizers (this is also the difference between soft PVC and hard PVC), its physical properties are poor (for example, water pipes need to withstand a certain water pre ssure, and soft PVC is not suitable for use), so its scope of use is limited.

Hard PVC does not contain plasticizers, so it is easy to shape and has good physical properties, so it has great development and application value. During the production process of PVC materials, several additives are bound to be added, such as stabilizers, plasticizers, etc. If all environmentally friendly additives are used, then PVC pipes will also be non-toxic, odorless and environmentally friendly products.

65MPa, steel-steel positive tensile bonding strength>30MPa, shear strength>18MPa, can withstand large loads, and is resistant to aging and fatigue. , Corrosion-resistant, stable performance within expected life, suitable for structures withstanding strong forces.

Structural adhesive has high strength, peeling resistance, impact resistance, and simple construction technology. Used for bonding between metals, ceramics, plastics, rubber, wood and other materials of the same type or between different types of materials. It can partially replace traditional connection forms such as welding, riveting and bolting. The joint surface should have even distribution of lifting force and no thermal influence or deformation on the parts.

Structural adhesives are widely used in engineering, mainly used for reinforcement, anchoring, bonding, repairing of components, etc.; such as bonding steel, bonding carbon fiber, planting bars, crack reinforcement and sealing, hole repair, road construction, etc. Nail pasting, surface protection, concrete bonding, etc.

Extended information:

Usage:

1. Surface treatment: roughen the parts to be repaired or bonded , then clean with detergent.

2. Preparation: Mix the two components A and B evenly according to the mass ratio A:B=4:1 or the volume ratio 3:1, and use it up within the specified operating time limit.

3. Coating: Apply the pre pared glue evenly on the surface of the object to be adhered.

4. Curing: Curing at 20~25℃ for 24 hours or 20~25℃ for 2 hours + 80℃ for 2 hours before being put into use. If the temperature is low, heating or extending the curing time should be used to promote curing.

Reference material: Baidu Encyclopedia-Structural Adhesive