黄橙渐变色广告牌
What color can be made by adding yellow and red?
1. Mixing red and yellow can create orange. When the ratio of red and yellow is moderate, pink can be produced.
2. Mixing yellow and blue will produce green. If the ratio of red, green and blue is 5:2:3, pink can also be produced.
3. Usually, it is difficult to accurately mix other colors with gouache paint from the three primary colors of red, yellow and blue. Using Puhong's three primary colors (red, yellow, and blue) can create more colors:
-When blue and yellow are mixed, green will be obtained. As the blue component increases, the color will gradually change from yellow to green.
-Mix red and blue to get purple, and adding red components can gradient to purple.
-When red and yellow are mixed, orange will be obtained. Adding red or yellow components can gradually change to different orange colors.
Color mixing skills:
1. When mixing colors, you should first mix the secondary colors and secondary colors in small containers.
2. Add the color with smaller tinting power (primary color) first, then gradually add the color with strong tinting power (secondary color), and keep stirring to observe the color change.
3. When mixing colors, proceed from light to dark, especially when adding pigments with strong tinting power, avoid excess.
4. There may be a difference in color between the wet film state and the film color after drying. Color matching should be adjusted based on sample status.
5. Understand the miscibility of different coatings and select coatings with the same properties to blend with each other.
6. Pay attention to the impact that auxiliary materials such as driers, curing agents, thinners, etc. may have on the color.
7. In order to avoid color floating, blooming and other phenomena, an appropriate amount of surfactant, leveling agent or anti-floating agent can be added.
8. For example, to pre pare gray or green complex paint, it may be necessary to add a trace amount of silicone oil to pre vent color floating.
2. Mixing yellow and blue will produce green. If the ratio of red, green and blue is 5:2:3, pink can also be produced.
3. Usually, it is difficult to accurately mix other colors with gouache paint from the three primary colors of red, yellow and blue. Using Puhong's three primary colors (red, yellow, and blue) can create more colors:
-When blue and yellow are mixed, green will be obtained. As the blue component increases, the color will gradually change from yellow to green.
-Mix red and blue to get purple, and adding red components can gradient to purple.
-When red and yellow are mixed, orange will be obtained. Adding red or yellow components can gradually change to different orange colors.
Color mixing skills:
1. When mixing colors, you should first mix the secondary colors and secondary colors in small containers.
2. Add the color with smaller tinting power (primary color) first, then gradually add the color with strong tinting power (secondary color), and keep stirring to observe the color change.
3. When mixing colors, proceed from light to dark, especially when adding pigments with strong tinting power, avoid excess.
4. There may be a difference in color between the wet film state and the film color after drying. Color matching should be adjusted based on sample status.
5. Understand the miscibility of different coatings and select coatings with the same properties to blend with each other.
6. Pay attention to the impact that auxiliary materials such as driers, curing agents, thinners, etc. may have on the color.
7. In order to avoid color floating, blooming and other phenomena, an appropriate amount of surfactant, leveling agent or anti-floating agent can be added.
8. For example, to pre pare gray or green complex paint, it may be necessary to add a trace amount of silicone oil to pre vent color floating.
Hello
One is the brightness gradient, which refers to the change of the depth of a color itself. For example, red, there are light pink-red-dark red and so on. (See the picture)
The second is the purity gradient, which is to add white to a color, or add other colors to make it gray, then its color will not be bright, such as purple, add a little white, and it will become light purple. , add a little more white, it becomes lighter, the purity is reduced, and it is no longer pure purple. Similarly, if purple is added with yellow (a little less yellow), it will become purple-gray. In this way, purple is no longer pure. The gradient sequence is: Purple - light purple - a lighter purple; Purple - a grayish purple (with a little yellow added) - Gray Purple - a very gray purple (with a little more yellow added). (See picture)
The third is the gradient of hue. Hue refers to the six colors of red, orange, yellow, green, blue and purple. Hue gradient is actually a color transition. For example, if you use blue and red to draw, you must put a purple transition between them. If you use orange and green to draw, put a yellow transition between them. This transition is called a hue gradient. (Of course, you can also make a more detailed transition, such as: orange-yellow-orange-yellow-yellow-green-green-green-blue.) When using warm and cold colors, or when using contrasting or complementary colors, use hue gradients to make the transition. , which will harmonize the colors of the picture. (See picture)
Please adopt if you are satisfied
One is the brightness gradient, which refers to the change of the depth of a color itself. For example, red, there are light pink-red-dark red and so on. (See the picture)
The second is the purity gradient, which is to add white to a color, or add other colors to make it gray, then its color will not be bright, such as purple, add a little white, and it will become light purple. , add a little more white, it becomes lighter, the purity is reduced, and it is no longer pure purple. Similarly, if purple is added with yellow (a little less yellow), it will become purple-gray. In this way, purple is no longer pure. The gradient sequence is: Purple - light purple - a lighter purple; Purple - a grayish purple (with a little yellow added) - Gray Purple - a very gray purple (with a little more yellow added). (See picture)
The third is the gradient of hue. Hue refers to the six colors of red, orange, yellow, green, blue and purple. Hue gradient is actually a color transition. For example, if you use blue and red to draw, you must put a purple transition between them. If you use orange and green to draw, put a yellow transition between them. This transition is called a hue gradient. (Of course, you can also make a more detailed transition, such as: orange-yellow-orange-yellow-yellow-green-green-green-blue.) When using warm and cold colors, or when using contrasting or complementary colors, use hue gradients to make the transition. , which will harmonize the colors of the picture. (See picture)
Please adopt if you are satisfied