Three-story shop billboard renderings

If the store is on the third floor, the location of the billboard depends on the specific city requirements.
You can’t put up billboards on the facade of your house casually. If you don’t go through formal procedures, you can’t put up billboards. According to regulations, the following materials need to be submitted for approval of billboards in front of self-employed stores: ① Two copies of the store's business license or industrial and commercial name approval ② Two copies of the lease contract ③ Two copies of the outdoor billboard renderings ④ Application report, including the installation location, Two copies of release time, content, form, specifications, and quantity ⑤ Two copies of the property rights certificate ⑥ One copy of the store location map can be downloaded from Baidu or other websites, but the specific location of the store must be marked on the map. Then go to the local government service hall to handle it. If your materials are shown to the urban management, they will review them for you. For example, after the urban management acceptance hall accepts them, urban management staff will visit the site within a week, and then after the leaders at all levels review and agree, then Turning to the industrial and commercial review content, if you disagree with any link, it means that the review and approval was unsuccessful. If it is forcibly installed without approval, it will be dismantled first and then fined. Then it will be more troublesome and costly to get approval again.
Billboards are a signaling tool in the pull system to start the next production process or to transport in-process products to downstream processes. The term means "signal" or "signal board" in Japanese. Generally refers to all outdoor media that deliver advertising information. Media size depends on actual environment. Shop signs, door headers, and facade images can be drawn by hand, computer-generated, or printed on paper. The materials of billboards are generally made of square tubes, angle steel, etc. that are welded. There can be three-dimensional boards, light cloth, blister, car paint, gusset boards, aluminum-plastic panels, etc.

In the study yesterday and the day before yesterday, the editor explained some basic principles and basic requirements for setting up door signs. Although the door sign plays a great role in the entire store, you should not be anxious because of it. You must complete all the necessary processes and procedures before installing it. Otherwise, you may receive a fine from the urban management department, and you may be fined. Remove the installed door sign. Today, the editor will explain to you how to approve and the format of the approval report.

The approval of door signboards is relatively complicated and requires level-by-level notification and approval. So how do we approve it? According to regulations, the following materials need to be submitted for approval of billboards on the door of self-employed stores
First, 2 copies of the store business license or industrial and commercial name approval;
Second, 2 copies of the lease contract;
Third, 2 copies of outdoor billboard renderings. The renderings must be in color. When shooting, you should take photos of about 80cm above and below the door.
Fourth, application report, including setting location, release time, content, form, specifications, quantity; in duplicate.
Fifth, 2 copies of the property ownership certificate;
Sixth, 1 copy of the store location map. This map can be downloaded from Baidu or other websites, but the specific location of the store must be marked on the map!
Then go to the local government service hall to handle it. If your materials are shown to the urban management, they will review them for you. After the application is accepted in the urban management acceptance hall, urban management staff will inspect the site within a week. After that, leaders at all levels will review and approve the application, and then move to the industrial and commercial review content. If there is any link that does not agree, it means that the approval was unsuccessful. If it is forcibly installed without approval, it will be dismantled first and then fined. Then it will be more troublesome and costly to get approval again.

Sample of door decoration approval letter
Application form XX urban management leader:
My unit plans to (1. build xxx project; 2. in xxx Carry out interior decoration of the building 3. The height of the door is xxcm and the length is xxcm. We will now submit the drawings and relevant information to your unit to apply for the door advertisement review procedures. I hope your unit will handle it
(Organization seal) or Signature (2) Facade decoration renderings (3) Installation construction drawings and description of all materials.
Applicant: XXX
Application time: XX, month XX, XXX
Advertising approval application form. For example
Xiaoshan District Urban Management and Law Enforcement Bureau:
It is located in Room 401, No. 219, Shixin North Road, Xiaoshan District Economic and Technological Development Zone. The door head is made based on the original one. The blister door head with luminous characters is 11 meters wide and high. 1.2 meters, each word "Wanfeng Pharmaceutical" will be 70 centimeters, and "Please go to the second floor" will be 20 centimeters each.
Installation time: X, X, to X, X
Please approve it. Looking forward to it!
Applicant: XXX
Application time: XX, XX, XXXX
Sample of door sign production application form
XX County City Appearance Management Bureau:
In response to our county's economic dispatch meeting in October and to beautify Lixin, our unit plans to renovate and brighten the door. The door will be composed of a large range of LED lights. The safety of the colorful lighting is the responsibility of the installer. Ensure that the road will not be polluted during the construction period, construction waste will not be dumped, and the city appearance will not be affected.
Please also ask the leaders for approval! Thank you
Applicant: XXX
Application time: XX, month XX, XXX
/>
Okay, I have finished introducing the door sign approval process and the sample approval report. Of course, if you have applied for a door sign and want to make a door sign. If you want to use luminous characters, you can privately chat with the editor. If this article is useful to you, it is best to save it. This article was written by Zhengzhou Mingliang Lighting Engineering Co., Ltd., please indicate the source when reprinting!

Currently, LED billboards with luminous characters are relatively popular. Here are some common luminous characters.

1. Acrylic luminous characters

Three-sided acrylic luminous characters, the front and sides are acrylic, the bottom plate is PVC surrounding the characters: the material is acrylic (imported board and domestic board) panel , thick PVC material surrounds, and the inner core of the characters is covered with LED light source. The advantages are that it lights up at night, the surface is glossy, the color is bright, waterproof, and the most important thing is energy saving. The disadvantage is that the characters cannot be made too small. It is suitable for indoor and outdoor, store signboards, Large corporate promotional building word logo.

2. Blister-shaped luminous characters

The material function is similar to that of flat luminous characters, except that the character strokes are raised tangible surfaces, which have the advantages of being more classy, ​​strong and wear-resistant. Damage-resistant, waterproof and energy-saving. It is suitable for all kinds of outdoor advertising characters, and the whole blister panel is more suitable for the signboards and image walls of Zhanxiang liquid stores.

3. Light box characters

It combines the craftsmanship of stainless steel and aluminum characters. The biggest breakthrough is that the characters emit light by themselves, eliminating the need for external lighting at night. , the specific method is to hollow out the text strokes, replace them with light-transmitting acrylic sheets, and install cold light source 3.3 (daylight tube) or neon lights in the inner cavity of the text, so that it can take advantage of the natural contrast effect of colors during the day, and at night For example, it emits light by itself, and there are no spots caused by external lighting on the surrounding walls. The text effect is quite obvious, but the disadvantage is that the cost is higher and the maintenance is slightly complicated. You need to use tools such as a gondola to remove the outer panel to replace the light source.

4. LED luminous characters

LED is a sign material category that has just developed rapidly in recent years. It can replace neon lights and can be used in restaurants, shopping malls, convenience stores, open-air squares and buildings. Light box signs and luminous characters. It has the advantages of high brightness, long life (up to 150,000 maintenance-free hours), high efficiency, easy installation, reliable performance, and high cost performance, making it widely used.

5. Exposed luminous characters

The plane and surrounding edges are the same as those of ordinary luminous characters. The only difference is the light source, which is composed of small dot LED lamp beads and covers the panel with characters. The advantage is that it can emit a strong light source no matter day or night, and it is energy-saving. Other features are the same as the Yak edge luminous characters, and it is suitable for use in store signs, KTV, nightclubs, hotels, guesthouses and other entertainment venue signs.