Colorful billboard lights
LED billboards make full use of the energy-saving and environmentally friendly features of LED light-emitting diodes to create colorful signs. Billboards are also known as: LED electronic light boxes, LED luminous characters, LED waterproof signs, LED luminous characters, LED external luminous characters, LED iron luminous characters, LED zinc iron luminous characters, LED stainless steel luminous characters, LED titanium luminous characters, LED aluminum plate luminous characters, LED exposed luminous characters, LED colorful luminous characters, LED Light box characters,
According to the requests of our friends, Shenzhen Jianweichuang Optoelectronics Technology Co., Ltd. has shared its many years of LED signmaking experience with you. If you have any questions or better methods, please let us know. connect.
Tools required for the production of LED billboards: 30W or 40W electric soldering iron, soldering tin, electric drill, glue gun, screwdriver, etc.
Materials required for the production of LED billboards: formed iron letters (pre ferably purchased locally), Reduce transportation costs, glass glue, resistors (our factory can provide), wires (our factory can provide), special power supply for LED signs (our factory can provide).
Three LED billboard production steps:
1. Drilling: Fix the purchased formed iron letters to the appropriate position, use an electric drill to drill: 5MM or 8mm, the spacing is based on the external signboard system. It depends on the height and production cost. Generally, the center spacing of LEDs is: 10-30 mm. The smaller the spacing, the better the effect and the higher the cost.
2. Insert the lights: Clean the drilled holes and place the lights one by one.
3. Wiring: first connect in series and then in parallel to the power supply. This step is difficult. Don’t worry. Shenzhen Jianweichuang Optoelectronics Technology Co., Ltd. has already made and connected LED light strings. Each string has pre -installed The remaining threads are usually red and connected to the positive pole of the power supply, and the black thread is connected to the negative pole of the dedicated power supply for the LED in the search chamber.
4. Test aging: After connecting all the LEDs, check and deal with those that do not light up, and then perform an aging test for 24 hours.
5. Sealing: Fix the LED to the iron sheet.
6. Test again and install.
Specific methods for making LED electronic displays
Materials: order unit boards, aluminum alloy frames (indoors), sheet metal boxes (outdoors), power supplies, systems, wires (ribbon cables) , power cord, network cable), screws, etc.;
Tools: soldering iron, tin wire, computer, screwdriver, wrench, cutting machine, vise, wire stripper, etc.;
Method: assembly, debugging
If you only do assembly, the equipment cost will be controlled within 10,000 yuan. Workshop rental costs vary from city to city. A starting capital of 50,000 yuan is enough, but you must find a relatively strong and honest manufacturer and borrow the manufacturer's platform in the form of an agent. If you have relevant bids for large projects, you can use the manufacturer's qualifications. For small projects, you can adjust module sets from the manufacturer. The manufacturer provides all technical guidance.
Development route: One-stop service including sales, installation, debugging, repair and maintenance (need to recruit 1-2 engineering installation personnel).
There are many types of advertising lights.
1. LED Advertising Lights
LED advertising lights are currently one of the most common advertising lamps. It uses LED (light-emitting diode) as the light source and has the characteristics of bright color, high brightness, low power consumption and long life. LED advertising lights can be made into various shapes and sizes and are suitable for large outdoor billboards, commercial blocks, exhibition venues and other places.
2. Neon signboard
Neon signboard is an advertising lamp made of neon tubes. It has a unique flashing effect and rich colors that attract people's attention and is often used to make iconic billboards and nighttime landscape decorations.
3. Projection Advertising Lamp
Projection Advertising Lamp is a lamp that uses projection technology to project advertising content onto a wall or large screen. It is suitable for shopping malls, cinemas, hotels and other places. It can display dynamic or static advertising content and has the characteristics of good visual effects and wide coverage.
4. LCD advertising machine
LCD advertising machine is a modern advertising equipment that integrates liquid crystal display technology and advertising playback system. . It has the characteristics of high-definition display, convenient operation, and rich content. It can play various forms of advertising content such as text, pictures, and videos. It is widely used in public places such as shopping malls, supermarkets, and stations.
The above types of advertising lamps are widely used in the market and each has its own characteristics. Suitable advertising lamps can be selected according to different needs and places.