How to stick advertising cloth to billboard

本文目录一览I、How to hang Optimus Prime advertising canvas

Installing the inkjet advertising canvas of Optimus Prime billboard requires professional high-altitude workers. Safety belts must be worn when installing billboard canvas at high altitudes. .

The specific method of installing the canvas:

Stretch the canvas underneath

Roll up the canvas and use a rope to place the canvas on the billboard

Slowly unfold the canvas clockwise.

The installation of the canvas requires four people to complete

Open the canvas while tightening it up and down

Finally Level the canvas as a whole and pull the rope closer

Provided by Ruicai Optimus Prime Production Advertising Tower

II、How to make an advertising cloth on a tricycle?
1. First, look for the billboard design and information of the mobile tricycle multigrain pancakes.
2. Secondly, collect materials for making billboards.
3. Then make it based on the found billboard design drawings and information.
4. Finally, the billboard is installed on the mobile tricycle and the billboard is ready.

III、How to fix large billboard inkjet printing
The method is as follows:
1. Installation of inkjet cloth, about 100 square meters, the normal picture is double folding and buckling, the distance between buckles is 30CM , tie with cable ties or wire or rope.
2. Iron wire (commonly known as tie wire) is commonly used. Use two ties together. Because it is cheap and very strong. If possible, tie the front of the picture with a rope to make it stronger. ‍

相关文章