Guangdong advertising light box design
Yanglin Electronics customized dynamic light boxes are designed to partition the LED light source according to the picture, and cooperate with the controller to flash, so that static advertising pictures can be displayed Create dynamic effects to make ads more attractive. The process of customizing Yang Lin's dynamic light box has the following points.
💰Price, Features
Customers understand the price and features of the product.
🖼️Provide picture files
Customers provide picture files (picture source files (psd, cdr, ai, eps format) or high-definition pictures).
📏Size, frame color and style
Determine the size, frame color and style of the light box (including power outlet location and power plug specifications).
🎨Design flashing effect
Design flashing effect (the flashing effect can be designed according to customer requirements, and the order can be changed).
👀Rendering Confirmation
Send the rendering to the customer via QQ or email for confirmation (if you are not satisfied with the effect, you can redesign it until the customer is satisfied).
💳Pay deposit or full payment
Customer pays deposit or full payment.
🏭Production
The factory arranges production and production (determines the delivery date and logistics transportation method with the customer).
🚚Shipping
Production is completed and shipment is arranged.
📦Logistics and transportation follow-up and customer return visits
Logistics and transportation follow-up and customer return visits.
The making method of a homemade advertising light box is as follows:
1. Design: Make the size, color and font of the light box according to the required design requirements Changes in the primary and secondary arrangement of pictures and texts, and placement in horizontal and vertical directions. In addition, the brackets must be pre pared at the installation site, and the size, font, and color of each character must be calculated based on the design, and the characters must be searched.
2. Keel: generally hexahedron.
3. Angle iron: If possible, you can process it by yourself. If you have no conditions, you can process it externally.
4. Wood: Use 2×2 cm square wood for nailing.
5. Cutting materials: four pieces each of length and width, apply white latex to paste and nail them on. The floor cabinet is made of aluminum alloy, and the height, width and length dimensions remain unchanged. Saw it at a 45 degree angle and connect it with a plug-in.
6. Andon: Generally, two or three fluorescent tubes are used. For 1 meter long lamps, use a light box of more than 2 meters. 30W lamp, placed in a light box above 1 meter. The thickness is generally 20-25 cm.
7. Upper board: When driving small nails, use an electric drill to drill a small hole first, otherwise the hard nails will crack. Just nail them on the edge. If you are more than one meter long, just nail three or four. Can. Only 4 nails are needed for the wide side panel, and holes are drilled on the side to pass the wires through.
8. Aluminum strip: Use 20×20MM aluminum angle, the length and width are 2mm larger than the upper plexiglass plate. The aluminum angle head is sawn at a 45° angle, and the screws are nailed to the 20MM thick side, and the front includes regular script. The nails are never visible.
9. Paste organic words: Arrange the words according to the design on the surface of the light box and lightly grid them, straighten the words, and then paste them with organic glass glue. There are two methods of pasting, one is Apply drops of organic glue. Use another medical needle to suck up the organic glue and gently inject the edge. The second is better than the first. Check to see if there are any typos, missing words, or reversed words. Check whether each word is stuck firmly and whether there are any missing words.
10. Cleaning: Use a clean small piece of cloth, dip it in some water, and then squeeze some toothpaste to wipe it evenly. After wiping it evenly, use the cloth to dip it in some water, and wipe it over a large area. It will not cause too much water. Just wet the cloth.