How do you nail the letters on the billboard so they don’t become crooked?
How to use nails to measure the size of a picture frame so that it does not hang crookedly
1. First, measure the size of the hanging picture and determine the installation location of the hanging picture. Plan in advance and pre pare the appropriate amount of nails.
2. Secondly, use a level to ensure balance, place the hanging painting horizontally on it, determine the installation position of the nails, and then use a hammer to gently tap the nails, but pay attention to ensure that the nails are firm.
3. Finally, hang the groove on the back of the hanging painting on a nail and adjust the level.
2. Secondly, use a level to ensure balance, place the hanging painting horizontally on it, determine the installation position of the nails, and then use a hammer to gently tap the nails, but pay attention to ensure that the nails are firm.
3. Finally, hang the groove on the back of the hanging painting on a nail and adjust the level.
There are many ways to position screen printing:
1. Backing method
For a substrate with a certain thickness and neat edges, its vertical and horizontal sides can be positioned close to the fixed backing on the operating table.
2. Trenching method
For For substrates with holes, 2-3 holes can be used as positioning holes and placed on nails fixed on the operating table (the height of the nails is lower than the thickness of the substrate) for positioning.
3. > The operating table is made of glass and other materials with good light transmittance, and a light is installed below. For substrates with certain light transmittance, the baseline on the substrate and the baseline on the operating table are aligned with each other for positioning and overprinting. .
4. Suction method
For small or thin substrates, the suction holes on the operating table are used to suck and position them.
5. />The operating table is coated with adhesive to adhere to the substrate, and this method is used to position the substrate. Fixed on the long operating table, the regular holes on the screen match (can be inserted)
Positioning of fabric screen printing
1. For small area fabrics with a certain thickness and hardness , such as clothing trademarks, hat brims, shoe uppers, bag pieces, etc., can use the backing positioning method. If the substrate is too soft, the substrate can be sized to make it "squeaky" without affecting the screen printing effect and the use effect of the screen printing product. "To facilitate positioning.
2. For large-area fabric printing such as clothing pieces, bed sheets, towels, pillowcases and quilt covers, curtains, tablecloths, etc., and the substrate is soft, it is appropriate to use the platen method to position (run the plate) screen printing .
I hope the above is useful to you
1. Backing method
For a substrate with a certain thickness and neat edges, its vertical and horizontal sides can be positioned close to the fixed backing on the operating table.
2. Trenching method
For For substrates with holes, 2-3 holes can be used as positioning holes and placed on nails fixed on the operating table (the height of the nails is lower than the thickness of the substrate) for positioning.
3. > The operating table is made of glass and other materials with good light transmittance, and a light is installed below. For substrates with certain light transmittance, the baseline on the substrate and the baseline on the operating table are aligned with each other for positioning and overprinting. .
4. Suction method
For small or thin substrates, the suction holes on the operating table are used to suck and position them.
5. />The operating table is coated with adhesive to adhere to the substrate, and this method is used to position the substrate. Fixed on the long operating table, the regular holes on the screen match (can be inserted)
Positioning of fabric screen printing
1. For small area fabrics with a certain thickness and hardness , such as clothing trademarks, hat brims, shoe uppers, bag pieces, etc., can use the backing positioning method. If the substrate is too soft, the substrate can be sized to make it "squeaky" without affecting the screen printing effect and the use effect of the screen printing product. "To facilitate positioning.
2. For large-area fabric printing such as clothing pieces, bed sheets, towels, pillowcases and quilt covers, curtains, tablecloths, etc., and the substrate is soft, it is appropriate to use the platen method to position (run the plate) screen printing .
I hope the above is useful to you