Legal analysis: Different functions of outdoor billboards require approval from different departments.
1. The Planning Branch is responsible for reviewing the location, specifications, form, color, quantity, and overall effect of outdoor advertising and store signs.
2. The Public Management Center is responsible for charging fees for the safety of national sculpture lighting outdoor advertisements, store signage, occupation of public space, and relevant regulations on use.
3. The Law Enforcement Branch shall supervise the construction process according to the approved plan, inspect and accept the participating departments, supervise and urge the rectifications to be in place, and charge fees or impose penalties in accordance with the law in accordance with relevant regulations.
4. Nowadays, the design and installation requirements of outdoor advertising are becoming more and more standardized. Before implementing various types of outdoor advertising, approval procedures need to be completed. Implementation can only be carried out after approval. After the implementation is completed, it will be accepted and rectified in place.
Legal basis: Article 42 of the Advertising Law of the People's Republic of China shall not set up outdoor advertisements under any of the following circumstances:
(1) Using traffic safety facilities and traffic signs;
(2) ) Affecting the use of municipal public facilities, traffic safety facilities, traffic signs, fire protection facilities, and fire safety signs;
(3) Impeding production or people's lives, damaging the city's appearance;
(4) Infecting state agencies, Set up in construction control zones of cultural relics protection units, scenic spots, etc., or in areas where outdoor advertising is prohibited by local people's governments at or above the county level.
-Clear the person responsible for the fire safety of the place and the manager, and implement the fire safety responsibilities.
-Develop a fire safety management system that is consistent with the actual situation of the unit, hang it on the wall and print it out for employees to learn from.
2. Requirements for site fire safety settings
-Process fire protection design, completion acceptance fire protection filing and putting into use, and pre -operation fire safety inspection procedures in accordance with the law.
-The interior decoration is made of non-combustible and flame-retardant materials and complies with fire protection technical standards.
- Fire safety evacuation passages and safety exits are smooth, and barriers, billboards and other obstacles that may affect the evacuation and escape of people must not be placed on evacuation passages, exits, and windows.
-Evacuation signs and fire emergency lighting meet the requirements.
-The fire truck passages around the site are clear.
-The number of fire extinguishers is sufficient, the selection is accurate, the placement is obvious, easy to access, and regularly maintained.
-The water pre ssure of indoor fire hydrants should meet the requirements; the fire hydrant box should be eye-catching and unobstructed; the hose and water gun should be complete and easy to use; the fire hydrant box door should be equipped with an emergency opening device; the fire hydrant pump start button should be able to start the fire water pump normally.
-The automatic fire alarm system, automatic sprinkler system and other facilities are in good condition and effective, and are regularly maintained.
3. Fire source control measures
-Carry out fire pre vention inspections before and after work every day, conduct regular inspections during business hours, and establish fire pre vention inspection and inspection records.
-It is prohibited to operate, store or use flammable and explosive dangerous goods.
-Electrical lines should be protected through pipes; electrical lines and equipment should be regularly inspected and tested; at the end of business, non-essential power sources in the business pre mises should be cut off.
- Wherever there are flammable or combustible materials, open flames should be strictly prohibited, and no fire and no smoking signs should be set up in obvious places.
-When open flame operations such as electricity and gas welding are really necessary, the site should suspend operations, implement on-site guardians, clear combustible materials in the construction area, and install fire-fighting equipment to ensure the safety of fire operations.
4. Fire publicity and training
-The person responsible for fire safety at the site should be familiar with: fire safety responsibilities; fire hazards and fire pre vention measures in the site; administrative and criminal responsibilities for fire safety that should be borne according to law.
-The person responsible for the fire safety of the site should provide fire safety education to employees at least once every quarter, and conduct fire-fighting and emergency evacuation drills. Employees should undergo fire safety education before taking up their posts and meet the requirements of "one understanding and three skills" (understand the fire hazards of the place, be able to call the police, be able to put out fires, and be able to escape).
5. Fire safety signs
- Places should hang signboards containing "One Understanding, Three Meetings", Fire Safety Commitment, Fire Safety Notification, etc. in a conspicuous position.
-The place should set up fire equipment, fire reminders, warnings and other signs according to its own characteristics and in accordance with the "Fire Safety Signs and Signs List".
