Where can I find car body advertising in Weifang?

In our lives, the construction industry is developing more and more rapidly, and many new products have emerged, and these new products are playing an important role in our lives. It plays a very big role, the most common of which is aluminum-plastic panels. Aluminum-plastic panels are a layer of aluminum plate coated on the surface of polyethylene through chemical means, and are made by compre ssion. And aluminum-plastic panels are used in building exterior walls, advertising signs, display cabinets, water purifiers to pre vent dust, etc. However, there are still many friends who are not very familiar with aluminum-plastic panels, so the editor will tell you in detail Have knowledge about aluminum-plastic panels.

Aluminum-plastic composite panel manufacturer

Aluminum-plastic composite panel is made of chemically treated coated aluminum plate as the surface material and polyethylene plastic. It is a core material and is a composite material processed on special aluminum-plastic panel production equipment. The unique properties of aluminum-plastic composite panels determine their wide range of uses: it can be used for building exterior walls, curtain wall panels, renovation of old buildings, indoor wall and ceiling decoration, advertising signs, display stands, purification and dust pre vention project. It belongs to a new type of building decoration material.

1. Zhengding County Yikang Aluminum Plastic Panel Factory was established in 2004 and is one of the earliest manufacturers of aluminum plastic panels in the country. The company is located in Zhengding County, Shijiazhuang, Hebei Province, with very convenient transportation. It is a large enterprise specializing in the production of aluminum-plastic composite panels. The company has four of the most advanced fully-automatic hot-laminated composite aluminum-plastic production lines at home and abroad, and has first-class high-quality talents. It has specially hired well-known experts and professors in the industry at home and abroad as managers and consultants of the company.

2. Shandong Lehua Aluminum and Plastic Products Co., Ltd. was formerly known as Weifang Lehua Changle Aluminum and Plastic Products Co., Ltd., which was established on July 1, 1998. One of the earliest manufacturers of aluminum-plastic panels in the country.

3. Shanghai Puchuang Industrial Co., Ltd. was founded in 2006 with a registered capital of 1 million yuan. It specializes in the wholesale and retail of partition and ceiling decoration materials. The brands repre sented by the company include Longpai and Boluo. Lafarge, Knauf, Jieke and other first-line brands, and wholesale Armstrong and Armstrong mineral wool boards online.

Uses of aluminum-plastic panels

1. Building exterior walls and curtain wall panels.

2. Modification and renovation of the exterior walls of the old building.

3. Balconies, equipment units, and indoor compartments.

4. Panels, sign boards, and display stands.

5. Interior wall decorative panels, ceilings, and advertising signs.

6. Industrial materials, body of cooling vehicle.

7. Housings for air conditioners, TVs and other home appliances.

Construction technology of aluminum-plastic panels

Construction technology of dry-hanging aluminum-plastic panels

①. The laying out work is carried out according to the actual center line and elevation points of the civil construction; decoration The design of the surface is based on the axis of the building. The aluminum-plastic panel skeleton is composed of horizontal and vertical parts. The position lines of the vertical rods are first played, and then the anchoring points of the vertical rods are determined.

②. Install the fixed connectors on the basis of laying out the wires, use electric welding to fix the connectors, and paint the welds with anti-rust paint twice. The connecting parts are welded and fixed with the embedded parts on the main structure. When there are no embedded iron parts embedded in the main structure, expansion bolts can be drilled in the main structure to install expansion bolts and fixed with connecting iron parts.

③. Use welding method to install the skeleton. Check the elevation and centerline position at any time during installation. At the same time, the cross-section connecting welds should be treated with anti-rust paint, and the fixed connectors should be covered with hidden inspection records, including the welding of connectors. Seam length, thickness, location, embedding elevation, quantity, and embedding depth.

④. Install the aluminum-plastic plate on the inner frame of the profile. First tap and mill the screw holes, and use rivets to fix the aluminum-plastic plate facings to the profiled steel frame piece by piece; the gap between the plates is 10 ~15mm and then inject silicone weather-resistant sealant; it is strictly forbidden to remove the packaging paper before installing the aluminum plate, and tear off the packaging protective film until it is completed; construct according to the direction indicated by the arrow on the aluminum-plastic plate.

The above is the basic knowledge about aluminum-plastic panels that the editor has shared with you in detail. We hope that everyone can better understand aluminum through the content we share. Plastic board knowledge. Aluminum-plastic panels are a very common new material in our lives, and the weight of aluminum-plastic panels is very light, and the fire resistance is also very good, and it also has very strong impact resistance, and the coloring is also very good , easy to maintain, and very convenient in installation. You can imagine how great the impact of aluminum-plastic panels on our lives.

Tubatu provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free online, as well as decoration Tips for avoiding pitfalls! Click this link: [https://www.to8to.com/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb] and you can get it for free~

Weifang license plate code: Lu G, Lu V.

Weifang is a pre fecture-level city under the jurisdiction of Shandong Province. Shandong is abbreviated as Lu. It is located in the middle of the Shandong Peninsula, adjacent to Qingdao, Rizhao, Zibo, Yantai, Linyi and other places. As of 2016, it governs 4 districts, 6 cities and 2 counties. The total population in 2017 was 9.363 million.

Shandong local licenses: Jinan A, Qingdao B, Zibo C, Zaozhuang D, Dongying E, Yantai F, Weifang G, V, Jining H, Tai'an J, Weihai K, Rizhao L, Binzhou M, Dezhou N, Liaocheng P, Linyi Q, Heze R, Laiwu S.

Notes:

Although there are many types of vehicles, their structures are similar. This should be said to be the result of standardization and the need for large-scale production lines. With the development of society, advancement of science and technology and changes in demand, the appearance of railway vehicles has begun to change, especially the passenger carriages are no longer all the same old faces. However, their basic structure has not changed significantly, but the specific parts have a more scientific and advanced structural design.

Generally speaking, the basic structure of a vehicle consists of five major parts: the body, the underframe, the running section, the coupler buffer device and the braking device.

The car body is the part of the vehicle that is used to carry cargo or passengers, and is also the basis for installing and connecting other components of the vehicle. The bodies of early vehicles were mostly made of wood, supplemented by steel plates, bow bars, etc. for reinforcement. Modern car bodies are mainly steel structures or light metal structures.

Brother, anyone who does commercial advertising. Internet, car body, subway, TV, elevator, business cards, magazines, stickers, WeChat