Stainless steel luminous character billboard installation tutorial
2. Next, go to the hardware store to buy a suitable corner. I chose stainless steel corners for safety, as shown in the picture.
3. Look at the corner and you can see two holes. In the stainless steel luminous letters, there is a hole for fixing the screw, as shown in the picture.
4. Then, use a hand drill to fix a hole screw in the corner to the stainless steel luminous character, as shown in the picture.
5. To show the effect, I installed two corners on this approximately 30 cm stainless steel luminous character, as shown in the picture. For slightly larger characters, 4 to 5 corners are usually needed.
6. Next, use screws to fix the luminous characters to the back panel. I used aluminum-plastic board for the back panel, so I chose pointed screws, as shown in the picture.
7. Finally, after installing the two screws, the stainless steel luminous characters have been firmly fixed on the aluminum-plastic plate and are easy to remove, as shown in the picture.
1. First of all, we use a screwdriver to unscrew one of the screws of the stainless steel luminous characters as shown in the picture.
2. Next, we go to the hardware store to buy some corners. I use stainless steel, which is safer, as shown in the picture.
3. Then you can see that there are 2 eyes in the corner in the picture, and there is a removed screw eye in the stainless steel luminous letter, as shown in the picture.
4. Next, we use an electric drill to screw one of the holes in the corner to the stainless steel luminous letters as shown in the picture.
5. Then I will show you the effect. I have put 2 corners on this 30 cm stainless steel luminous character as shown in the picture. Generally, larger characters require 4-5.
6. Next, we use a hand drill to fix the luminous characters to the back panel with screws. The back panel is an aluminum-plastic board, so I use pointed screws here. As shown in the picture.
7. Finally, after we install the two screws, we can see that the stainless steel luminous characters have been firmly fixed on the aluminum-plastic plate and are easy to remove. As shown in the picture.