静安灯箱广告牌价格表
Nowadays on the street we can easily see some eye-catching billboards made of electronic light boxes. Electronic light boxes use high brightness to emit light. Electronic signboard composed of diodes, AOTE electronic light box controller, aluminum-plastic panels and aluminum profiles. The production process is to use special engraving software to design the content, which can be text or graphics, and then you can achieve changes such as text or pattern flashing. So what is the price of an electronic light box? How to make it? The editor explains in detail Let me introduce it.
Electronic light box price introduction:
(1) Jixiang A9 electronic light box, material: aluminum-plastic plate, shape: black, specifications: 1.22×2.44×350 yuan (meter/square meter) , Size: 60×40 (cm), Hangzhou Guoshuai Lighting Engineering Co., Ltd.
￥230.00 (minimum batch size 10-19 pieces)
￥220.00 (minimum batch size 20-29 pieces) )
￥200.00 (minimum batch size ≥ 30 pieces)
(2) Dianyi MS-001 electronic light box, material: aluminum, shape: square, specification size: 72×72 (cm), Jiangmen Dianyi Display Equipment Products Factory Co., Ltd.
￥320.00 (minimum batch size 1-100 pieces)
￥310.00 (minimum batch size ≥101 pieces)
(3) Huiling FG118-100 electronic light box, material: aluminum profile, shape: square, size: 100×200-5000×1200 (cm), Guangzhou Huiling Advertising Equipment Co., Ltd.
< p>￥800.00 (minimum batch size 5-9 square meters)￥750.00 (minimum batch size ≥10 square meters)
(4) Shifang SFLB150D double-sided fabric electronic light box, Material: aluminum profile/LED, shape: rectangular, size: 600 (cm), specifications: 1200×2000, 1500×2200, Guangzhou Shifang Advertising Co., Ltd.
￥900.00 (minimum batch size ≥ 2 square meters meters)
(5) Zhuowei MZ-D005 electronic light box, material: aluminum profile, galvanized pipe, galvanized sheet, tempered glass, size: length 150×thickness 35×height 250 (cm), Yangzhou Zhuowei Municipal Facilities Technology Co., Ltd.
￥2800.00 (minimum batch size ≥10 units) The price comes from the Internet and is for reference only.
Lightbox production steps:
1. Typesetting in CorelDRAW software, arrange the size and distance of the content, and arrange the positions where holes need to be drilled in the future to a diameter of 4.9 mm circle. It is recommended to use CorelDRAW-x4 version for this step.
2. Export the arranged CorelDRAW file as a PLT file, then import it into Wentai engraving software, and use a cutting plotter to engrave the graphics. The engraving material generally uses sticky notes. It is recommended to use reflective film. The texture effect produced by the membrane is better, but the price and cost are relatively high.
3. Remove the post-it note with the engraved content except the words, and stick the text part on the aluminum-plastic board. Generally, black 3mm aluminum-plastic board is used for electronic light boxes.
4. Drill holes according to the circle position arranged in the first step. Note: the diameter of the LED light is 5mm and 3mm. It is better to use 4.9mm and 2.9 drill bits when drilling.
5. Plug in the lamp, paying attention to the positive and negative poles of the lamp. After the lamp is inserted, use an LED electronic light box tester to test whether all the inserted lamps are bright, and then use a glue stick or three-second glue to seal all the lamps. The small lights are fixed on the aluminum-plastic panels, which also play a waterproof role.
6. Wiring, connect the small LED lights of each channel in series, and then use an LED electronic light box tester to check the resistance of each channel. Remember that the current of each channel should be controlled between 13-18 mA. , if the current is too large, it will easily burn out; if the current is too small, the LED light will not be bright enough.
7. Connect the controller and follow the circuit instructions on the controller. Test with 220V alternating current for about 5 minutes. Disconnect the alternating current and gently touch the resistor with your hand. If the resistor is hot, it means that the current in this circuit is relatively large and the resistor needs to be increased.
8. Encapsulation. Make sure that the above steps are ok. Use self-spraying paint to spray the lamp feet of the electronic lamp. This step is to pre vent short circuit between the lamps and waterproof. After the paint is dry, Just use the special wrapping for F-type light boxes to wrap the front and back plates.
In the above introduction, the editor introduced the price and production steps of electronic light boxes in detail. We can understand that the price of electronic light boxes is very cheap, high quality and low price. Electronic light boxes can also be called electronic signs. They are super bright. In the dark night, we can see the shining electronic light boxes from far away. They are the most effective way to attract customers. Moreover, electronic light boxes are energy-saving and environmentally friendly. , can be seen in many high-end restaurants, Western restaurants or beauty and bodybuilding, fitness and entertainment places.
There are also blister light boxes that cost 700 yuan per square meter
There are also many kinds of luminous characters. Acrylic luminous characters cost 550 yuan per meter (not Including steel frame angle iron)