Installation of small high pillar billboards

1. You can build the iron frame for advertising first. Then weld and install iron frames on the wall according to the actual situation on site. It is more suitable for long-term advertising, and the inkjet advertising cloth can be replaced frequently. The cost of investment is small. It can be said that a one-time investment can obtain long-term benefits.

2. First use an electric hammer to drill holes and insert the wood, and then nail the wooden strips. Nail the surrounding wooden strips, that is, the four sides of the inkjet advertising cloth. Finally, nail the inkjet advertising cloth to the wood, starting from the top edge.

The advantage of this method is that it is low cost, can be firm, and the printed advertising cloth can be smoothed; the disadvantage is that there are holes in the wall, so it is suitable for installation indoors. If installed outdoors, it generally does not exceed one year. The wood will rot.

Types of outdoor advertising

1. Neon billboards

By neon The rainbow tubes are bent into words or patterns, and are made of neon tubes of different colors, emitting colorful colors. It can also be combined with electronically controlled flashing patterns to increase the sense of movement, and the nighttime effect has a strong visual impact.

2. Single-column billboards

Billboards are placed on specially designed support columns, mostly column-type T-shaped or P-shaped. Advertising devices are set up on highways and major roads. Places such as traffic arteries are facing dense traffic and pedestrian flow. The commonly used size is 6 meters high by 18 meters wide, and mainly uses spotlights as lighting equipment.

3. Spotlight billboards

A billboard with spotlights or other lighting equipment around the billboard is called a spotlight billboard. It is characterized by beautiful appearance, excellent lighting effect at night, and advertising information can be clearly seen.

4. Large light boxes

Placed in advertising locations such as exterior walls, roofs or podiums of buildings, they serve as colorful billboards during the day and become "internal lighting" when lit at night. lightbox ads. Light box advertising lighting effects are better, but maintenance is more difficult than spotlight billboards, and the lamps used are more susceptible to wear and tear.

　1. Outdoor anti-aircraft guns, highway billboards, anti-aircraft guns, Optimus Prime advertisements, single-column advertisements because the total width of the photo machine used to hold the Advertising Inkjet Printing Board is 4.3m, so after confirming the content of the drawing board, the designed inkjet cloth was cut into a total circular width of 4.3m according to the actual specifications. At the same time, in order to avoid the white edge problem of the welding frame of the Nadeli advertising sign, we made At this time, the height of the drawing board should be 5 to 12 cm higher than the left and right sides of the support frame.

2. The outdoor advertising drawing board must be drawn according to the serial number marked on the computer design draft.

3. After all the interfaces are spray-painted with a digital photo machine, a patchwork machine or special glue on the computer should be used to piece together the drawing boards according to the serial numbers.

4. Drill buttonholes every 30-40 centimeters on the top, bottom, left and right sides of the billboard.