问题描述：
问题解答：
我来补答The Kabu light box installation method is as follows:
Tools: Kabu light box, aluminum profile, large decoder, light box, power supply, screwdriver, Gloves, screws, silicone strips, LED light strips, glass glue, aluminum profile frames.
1. Put the decoder into the aluminum profile groove, and then seamlessly connect the Kabu light box at a 45° angle, so that the diagonally opposite angles can be in place.
2. Use a screwdriver to tighten the internal and external decoding screws and fix the screws to complete the entire Kabu light box frame.
3. Put the back panel into the frame and fix it with screws. Then place the LED light strip on the bottom panel and fix it with glass glue. Install the power supply on the outer frame of the socket.
4. When installing the Kabu light box billboard screen, and install the silicone strip around the UV soft film, just insert the silicone strip into the aluminum profile frame. If you want to change the light box screen, you only need to pull out the rubber strip to change the light box screen. The operation is simple and the replacement is convenient.
5. The last step is to trim the four corners of the frame of the Kabu light box to avoid accidentally hurting your hands.
