Outdoor billboard iron frame renderings

The method is as follows:
1. Installation of inkjet cloth, covering an area of ​​about 100 square meters in Wuchang. The normal picture is double folding and buckling, between buckles and buckles. The distance is 30CM, tie it with a tie or wire or rope.
2. Iron wire (commonly known as tie wire) is commonly used. Use two ties together. Because it is cheap and very strong. If the front of the screen can be rolled, tie it with a rope to make it stronger. ‍

1. Outdoor advertising installation method: pasting
Pasting is the simplest way to install outdoor advertising. It does not require screws. It only requires people to use double-sided tape, sponge tape, glass glue and other various glues to paste it. That’s it. It should be noted that the installation environment is different, the advertising retention time is different, and people need different glue. For example, if the environment where outdoor advertisements are installed is relatively humid, people should choose water-resistant glue, otherwise the advertisement will fall off within a day after being pasted, which is not good.
2. Outdoor advertising installation method: hanging
Hanging is divided into sticky hanging type and hanging fixed type. The former is suitable for marble, glass, stainless steel and other wall bases. After people install the advertisement, they use AB glue Stick the edge strip or angle aluminum of the advertisement on the wall. If the advertisement is not flat, adjust the position, and finally fix it with glass glue to complete the installation. The latter is suitable for folding signs, which are large in size and heavy in quality. In the case of foam filling and pasting, this installation method requires drilling holes with an electric drill. After drilling the holes, use screws to tighten the advertisement.
3. Outdoor advertising installation method: pre set billboard installation
Preset billboard installation, people may find it strange based on the name, but when it comes to billboards on buses, you may understand. The default installation of billboards is at a fixed position. People only need to make suitable advertisements according to the length, width and height of the billboard to install them. It is very simple.
4. Outdoor advertising installation method: hanging type.
The installation of suspended advertising requires the use of tools such as iron chains, steel cables, fishing wire, and cable ties. As for which tools to use, people need to decide based on the indoor and outdoor environment and the weight of the signage.
5. Outdoor advertising installation method: buried.
Buried advertisements are very common, such as bulletin boards, guide signs on highways, etc. This kind of installation is suitable for floors with simple soil structures.