How many wires should be connected to the lamps on the billboard?
The poster said The minimum configuration refers to that aspect, the cost of lighting fixtures or the cost of electricity. The cost of using LED floodlights will be higher, but there is basically no need for maintenance in the future and the power consumption is minimal. The cost of ordinary metal halide lamps is lower, it is a little troublesome to maintain in the future, and the power consumption is extremely high.
Liangjie Lighting LED floodlight outdoor billboard lighting design:
1: Outdoor billboard
Illumination requirements ( Lux):
300Lux 500Lux 500Lux 1000Lux2: Uniformity requirements (UI)
Minimum illumination of the card surface
0.4Average illumination of the card surface
H=height W=width
Lamps Type: A=RVP350 LJ-TG10044 50WSY
B=RVP350 LJ-TG10046 80WSY
C=RVP350 LJ-TG10048 100WSY
Three: Lamp installation structure< /p>
Four: Liangjie Lighting Billboard Lighting Calculation Table
Note: 1: Maintenance factor 0.8 has been included in the calculation data
2: 1MB refers to the 1M distance between the lamps installed at the bottom of the billboard
3: Installation method: 1. Installed at the bottom of the billboard
: 2: respectively Installed on the top and bottom of billboards
Five: Bright lighting LED floodlight illumination
Summary: If the poster only uses lighting from top to bottom The plan recommends using 120w floodlights between 1.5 and 2 meters each. The greater the power and the smaller the spacing, the better the effect. Hope it helps, thank you!