电动车出租广告牌架子
一、How to remove the billboard behind the electric vehicle
1. Removal of the billboard: manual removal is the main method, supplemented by oxygen cutting.
2. Cut off the decorative power supply on all billboards → first remove the non-load-bearing parts (divide large-area advertising panels into small pieces to reduce wind load and reduce load-bearing) → then remove the load-bearing components → Classification and transportation of demolition objects
3. Reasonably arrange the construction sequence and provide written explanations to all demolition personnel.
4. Before dismantling, you should first observe the components and installation methods of the old billboards, choose the correct machinery for dismantling, and remember not to perform rough construction.
5. Listen to the instructions of current construction and management personnel to ensure construction safety.
6. When performing manual dismantling operations, workers should stand on a stable structure or scaffolding, and the dismantled components should be placed in a safe place.
7. Manual demolition construction should be carried out from top to bottom, layer by layer, and vertical cross operations are not allowed.
8. When using oxygen and acetylene to cut the metal frame of billboards, attention should be paid to the safety distance of gas cylinders and fire protection requirements.
2. Cut off the decorative power supply on all billboards → first remove the non-load-bearing parts (divide large-area advertising panels into small pieces to reduce wind load and reduce load-bearing) → then remove the load-bearing components → Classification and transportation of demolition objects
3. Reasonably arrange the construction sequence and provide written explanations to all demolition personnel.
4. Before dismantling, you should first observe the components and installation methods of the old billboards, choose the correct machinery for dismantling, and remember not to perform rough construction.
5. Listen to the instructions of current construction and management personnel to ensure construction safety.
6. When performing manual dismantling operations, workers should stand on a stable structure or scaffolding, and the dismantled components should be placed in a safe place.
7. Manual demolition construction should be carried out from top to bottom, layer by layer, and vertical cross operations are not allowed.
8. When using oxygen and acetylene to cut the metal frame of billboards, attention should be paid to the safety distance of gas cylinders and fire protection requirements.