Can mobile homes be used as PVC board billboards?

The method is as follows:

1. Qualified PVC flame-retardant pipes and qualified BV wires must be buried in the wall. The branching box cannot be buried because it affects the appearance. inside the wall.

2. When the power pipeline encounters a waterway, power on and off should be kept at a certain distance. PVC pipes should be pre ssed less frequently (PVC glue should be applied to the pre ssed ends).

3. When encountering strong or weak electricity, they cannot be put through the same pipe.

4. The wire diameter of the power supply wire must be selected according to the load (and leave a margin). The wire diameter is a waste and it is unsafe if the wire diameter is too small.

5. Install lights and sockets separately. Kitchens, living rooms, etc. should have as many channels as possible; circuit breakers should be selected according to load size, and sockets must be equipped with leakage switches.

6. The wire connectors must be connected properly; it is recommended that the connectors be welded. In short, installation of electrical wiring must be safe.

Extended information:

Indoor wire installation requirements for home decoration:

1. Generally used for sockets are single-core wires with 2.5 square meters of wires, single-core wires with 4 square meters of wires for air conditioners with more than 3 units, single-core wires 6 square wires are used for the main incoming wire, and two-color wires are used for the ground wire;

2. Three rolls of different colors are used as a set (for neutral wire, live wire, and ground wire). The lamps and lanterns are illuminated by single-core 1.5-square-meter wires, two rolls of different colors as a set (used for neutral wire and live wire);

3. Two-core and three-core sheathed wires are It is used as open wire, mostly used for construction on construction sites, and is rarely used in home decoration;

4. The thicker the audio wire, the better. It is recommended to use 2×1.52 or 2×1.2 specifications;

5. The more points the TV splitter has, the worse the TV signal will be. It is recommended to use less than 6 points as far as possible.

First choose the material based on whether it will be used indoors or outdoors. Generally speaking, the directional signs used for outdoor use are larger ones such as corporate logos, also called spiritual fortresses, publicity boards, etc., while smaller ones include direction signs, flower care signs, building signs for real estate, other signs, etc. wait.

The main body of this kind of corporate logo is generally made of metal materials, stainless steel, galvanized sheets, etc. When selecting materials, you should consider its wind resistance, sun protection, waterproof (anti-rust) and appearance, etc. Materials with good rust resistance It is a stainless steel plate. The larger the size, the thicker the material used, and the pre -embedding should be relatively larger, but it should not be too bulky. The larger and heavier the thing, the more time-consuming and laborious it is during transportation and installation. For the surface graphics and text, you can choose flat screen printing or three-dimensional pasting of acrylic, PVC, stainless steel, etc. according to your pre ference. If it needs to be made to be luminous, the text content can be laser-cut out on the main plate, lights can be installed inside, and then covered with a layer of light box sheet or acrylic and other light-transmitting materials. Some corporate logos use integral blister light boxes, which have very high professional requirements. It is best to find a large manufacturer to make them.

Small-sized outdoor signs include building signs, flower signs, business hours signs, etc. The material selection for small signs is relatively diverse and can be selected according to customer pre ferences and price requirements. I won’t go into details here.

After talking about the outdoor ones, let’s talk about the indoor signs. Indoor signage mainly includes index signs, department signs, warm reminder signs, floor tags, floor index signs, elevator signs, personnel direction signs, desktop signs, etc. The most commonly used material is aluminum profiles, combined with acrylic, PVC, two-color boards and other materials can have a variety of effects when used together.