Double-sided hanging billboard installation

1. Adhesive installation
Adhesive installation is the most common sign installation method and is suitable for small signs. During installation, choose the appropriate adhesive according to the material, environment and humidity, such as glass glue, foam glue, universal glue, sponge glue, double-sided tape, structural glue, etc. The disadvantage of stick-on installation is its relatively short durability.
2. Hanging installation
Hang installation is suitable for larger and lighter signs. During the installation process, first determine the drilling point, use an impact drill to drill the hole, and then install the self-tapping screws. When using a single self-tapping screw, you need to drill a hole in the center of the sign to keep it level, then fold the sign and hang it on the screw. After adjusting the position, apply fixing glue around it to fix it. The disadvantage of this method is that in a humid environment, the fixing glue may fall off, affecting the appearance.
3. Decorative screw-fixed installation
This installation method is relatively rare. Usually, customers design signboards according to the hole positions after reserving them. For example, acrylic plate clip-on paintings often use this method. The screw positioning must be accurate during installation, otherwise it will not be installed correctly.
4. Pre-embedded installation
Pre-embedded installation is mainly used for outdoor signage, and is distinguished according to the quality and volume of the sign. For example, the flower and plant signs in the park can be directly filled with soil and fixed, while large signs such as spiritual fortresses need to be dug and poured with concrete first, and then pre -buried according to the quality. During installation, concrete is first poured into the pit, and after solidification, the signboard is fixed with expansion wire, and finally the concrete is poured.
5. The pop-screw fixed type
The pop-screw fixed type is suitable for floors or walls of concrete structures and is used when the signs do not need to be moved. For example, street and parking signs are often fixed this way.
Henan Preliminary Sign Design and Production Co., Ltd. is a signage manufacturer integrating planning, design, production, installation and after-sales service. It specializes in the production of commercial signs, community signs, sales office signs, hospital signs, scenic spot signs, and school signs. Signs, office building signs, municipal signs, etc. Under a complete and scientific quality management system, the company provides customers with integrated identification system solutions.

The light body of the advertising light box is composed of a plexiglass board or a PVC board, plus a reversal film or organic characters or self-adhesive characters, etc., with a fluorescent tube as the light source and an angle iron composed of brackets. Features: low cost, easy to create, prominent theme, bright and eye-catching, diverse varieties, not limited by time, good publicity, deeply loved by users.

1. Light box production materials: Keel: made of wooden strips, angle iron or aluminum alloy profiles. Light source: two sets of fluorescent tubes. Panel: organic glass color plate or pvc color plate. Bracket: Triangle frame.

2. Commonly used tools for light boxes: electric drill, cross screwdriver, screwdriver, hacksaw, wood saw, shovel hammer, pliers, small nails, latex, hook knife, wire saw, plexiglass glue.

3. Key points of the operation process:

Design: According to the design requirements required by the customer, formulate the size, color, font, primary and secondary arrangement of graphics and text, and horizontal and vertical placement of the light box. In addition, the brackets must be determined at the installation site. Calculate the size, font, and color of each character based on the design, and search for characters.

Keel: generally hexahedron.

Materials: 20×20 or 30×30.

Angle iron: If possible, you can process it by yourself. If you have no conditions, you can process it externally.

Wood: Use 2×2 cm square wood for nailing. Cutting material: four lengths and four widths each. Subtract 0:5 cm from the length and width dimensions = the length of the wood. Saw 2×1 tenons at both ends, apply white latex paste and nail them on. The thickness dimension minus two material thicknesses + 0:5 = thickness length. Then apply white latex and nail it on.

Aluminum material: Use base cabinet aluminum alloy material, the height, width and length dimensions remain unchanged. Saw it at a 45 degree angle and connect it with a plug-in.

Andon: Generally use two or three fluorescent tubes. 40W 1:2 meter long lamp, use 1:3 meter or above light box. 30W lamp tubes are 0:9 meters long and are used in light boxes above 1:1 meters. The thickness is generally 20-25 cm.

Abstract: The double-sided hanging advertising machine is a hanging-mounted advertising machine. It is characterized by two display screens that can Play advertisements indoors and outdoors respectively, so that more people can see them. The main advantages of double-sided hanging advertising machines are wide coverage, space saving, easy to use, diversified publicity methods, fashionable and beautiful, and can be played in split screens and different displays. etc. However, due to the brightness problem of the double-sided advertising machine, it has not yet been promoted. It is mainly used in banks, cinemas and other areas. Let’s learn about the knowledge of double-sided hanging advertising machines. 1. What is a double-sided hanging advertising machine?
There are many types of advertising machines. Double-sided hanging advertising machines are the more popular ones. Traditional advertising machines only have one display screen, while double-sided hanging advertising machines have two display screens. A display screen can ensure that there are corresponding advertisements indoors and outdoors, and can be played singly or in combination, which is very convenient.
2. What are the functional advantages of the double-sided hanging advertising machine
The double-sided hanging advertising machine is a special advertising machine. Compared with the single-sided advertising machine, one side of the double-sided advertising machine faces the outside of the hall. , one side faces the hall, and plays promotional information. It is more common in banks, movie theaters, drinking bars, etc. The main advantages of double-sided advertising machines are:
1. One body and two screens can achieve different displays. , let more people see it.
2. Suspended installation saves space and has a wide coverage, so the space will not be blocked by the machine.
3. The operation is simple and convenient. You only need to deploy the advertising information, and then publish the content to the double-sided advertising machine terminal through a USB flash drive or network. It can be published in real time and operated anytime and anywhere.
4. Diversified publicity methods. The double-sided display screen is compatible with a variety of multimedia formats and can deliver a variety of text, pictures, and videos in an all-round way, fully considering the experience of different users.
5. The body is thin, the shape is fashionable and beautiful, has a good decorative effect, and is full of technology.
6. Split-screen display playback allows different advertising materials such as pictures and videos to be played at the same time, which brings higher economic benefits.
7. Automatic shutdown can be set according to business hours, saving time and effort; you can also set the playback content in advance, and which part of the content will be played at which time period, all intelligently set.
3. Why the double-sided advertising machine failed to be promoted
Although the functional advantages of the double-sided advertising machine are significant, it has not been fully promoted, but has gradually expanded the market. This is mainly because the double-sided advertising machine There is one drawback - not enough brightness.