切换画面的广告灯箱
壹、How to change the screen of this kind of light box
Generally commonly used ultra-thin light boxes are all-round opening ultra-thin light boxes (except suction cup type and crystal ultra-thin light boxes). The most commonly used steps to change the screen are as follows. It can be summarized into the following steps:
1. Place the ultra-thin light box flat on the table;
2. Remove the surrounding profiles;
3. Take out the surface panel;
4 ,Tear off the transparent plastic film covering the panel;
5. Wipe clean the side of the panel from which the plastic film has been removed;
6. Paste 3mm wide double-sided tape around the panel The size of the glue is exactly the size of the picture;
7. Take out the picture that has been wiped clean beforehand, and cover the front of the picture with the double-sided tape on the panel;
8. Use your hands or Use a rag to smooth the screen;
9. Tear off the double-sided tape. In this step, when tearing off the double-sided tape, use a rag to smooth the air between the screen and the panel while tearing it off;
10. Smooth the pasted picture;
11. Tear off the protective paper on the other side of the panel and wipe it clean;
12. Place the pasted picture panel back into the ultra-thin light box, balancing the top, bottom, left and right;
13. Cover the four profile side covers;
14. At this point, the screen installation is complete.
You can also place the picture directly on the light guide plate, tear off the protective paper and protective plastic film of the panel, place it on the picture, and cover the profile frame; if you want to make an ultra-thin light box, just look for (Goodbon )www.goodbong.cn
1. Place the ultra-thin light box flat on the table;
2. Remove the surrounding profiles;
3. Take out the surface panel;
4 ,Tear off the transparent plastic film covering the panel;
5. Wipe clean the side of the panel from which the plastic film has been removed;
6. Paste 3mm wide double-sided tape around the panel The size of the glue is exactly the size of the picture;
7. Take out the picture that has been wiped clean beforehand, and cover the front of the picture with the double-sided tape on the panel;
8. Use your hands or Use a rag to smooth the screen;
9. Tear off the double-sided tape. In this step, when tearing off the double-sided tape, use a rag to smooth the air between the screen and the panel while tearing it off;
10. Smooth the pasted picture;
11. Tear off the protective paper on the other side of the panel and wipe it clean;
12. Place the pasted picture panel back into the ultra-thin light box, balancing the top, bottom, left and right;
13. Cover the four profile side covers;
14. At this point, the screen installation is complete.
You can also place the picture directly on the light guide plate, tear off the protective paper and protective plastic film of the panel, place it on the picture, and cover the profile frame; if you want to make an ultra-thin light box, just look for (Goodbon )www.goodbong.cn