Question 1: How to adjust the time of the microcomputer timing switch of the billboard LED light. For example, set the load to an on time of 18:00 and an off time of 05:00. The setting method is as follows , the first open time is 18:00, the first off time is set to 05:00, the second open time, the second open time, the third open time and the third off time until the ten open time and ten off time are reset to zero (because it is not used). Then set the day of the week, set the current time on the time control switch, and set the time control switch to automatic. You can refer to the manual to set it up, it's very simple. Try it a few times and you'll get it.
Question 2: How to set the advertising light timer? Just buy a microcomputer controller from Delixi. It is cheap and can be found in most industrial electrical stores. I wish you success.
Question 3: How to set the street light timer? First pre ss the recovery and cancel button, pre ss it 3 times, and then pre ss the time control. On means on and off means off. When on is displayed, pre ss the timer and then pre ss Effective time, the time at this time is the time to turn on the light. Then pre ss time control, off-pre ss effective time-effective minutes. At this time, the time to turn off the light is displayed, and finally pre ss the clock to return to the main panel
Question 4: How to adjust the light box timer and set the timing , 1 on, 1 off. Then set it to automatic
Question 5: How to set the timing of the street light timing switch 1. If there is a setting, select it first, then select the time and calibration, this is on;
2 , pre ss settings again, adjust time, adjust minutes, and the first group is set. Just go on like this.
3. Select automatic, or select before the first step.
Question 6: Who knows how to adjust this kind of plaque light timer? It should be easy to adjust. Just set the start point and end point.
Question 7: How about the fish tank light timer? Set up according to instructions in the manual.
Question 8: The connection method of the timer, contactor and lamp connects the input and output of the time control switch directly to the AC contactor coil in series.
The main circuit of the contactor is connected to the street light control line.
Question 9: How to set the microcomputer timer TB1025 microcomputer time control switch, timer module chip>>TB10A (TB1025) microcomputer time control switch 1. Function and purpose This product uses PJ-62 The timing module can automatically turn on and off the power of various electrical equipment according to the time set by the user. It is widely used in programmed timing automatic control of electrical equipment in street lights, neon lights, advertising lights, rice cookers, aerators, sprinkler irrigation machines, pre heating and pre cooling devices and other fields. 2. Interpre tation of the display screen display 3. Technical parameters Rated voltage: 220V/50Hz Applicable voltage range: 160~240V Rated current: Pure resistive load 30A, inductive load 20A Time control range: 1 minute to 168 hours Setting times: 10 groups or 2 groups of programming timings every day (for example: setting on at 9 o'clock and off at 10 o'clock is called 1 group of programming) Control cycle: daily control or weekly control cycle (different timing settings can be achieved every day within a week) Timing error: problem 10: The school street light timer only works from Monday to Friday. How to set up a special time control switch?
It is divided into Monday to Sunday. The daily light on time and light off time can be set.
The size is not large and the price is not high.
You can find out by searching online.