The establishment of all outdoor LED displays must be approved by the industrial and commercial department. For outdoor LED displays that have not been approved, a rectification notice will be issued and the displays need to be forcibly dismantled. So, to install an outdoor LED display, you should mainly look for the following departments: industry and commerce, law enforcement, urban management, and urban construction planning. The standards are generally the same in various places, but the specifics vary from place to place. The first four departments must issue certificates. For formal ones, the public security department also needs to report.
Approval process for outdoor full-color LED display:
First, go to the Planning Bureau to apply for installation. That is: whether the setting plan of the LED screen meets the relevant requirements and requirements, and whether you agree with the setting plan of the electronic display screen. Information required: rental agreement for the location where the advertisement will be installed, location map of the advertisement location, safety certificate, and electricity usage certificate, structural drawings, photos before installation and renderings after installation.
Second, after the application is successful, go to the urban management department of the "Construction Bureau" to apply again. That is: will the installation of LED screens have any impact on the city and other related damages? If the LED screen installation area is relatively large, it must be approved by the Transportation Bureau before it can be installed.
Third, after you have successfully applied for both of the above, go to the "Zhibo Xiang Law Bureau" for processing. Information to be provided: The four-position plan of the location where the electronic screen is to be installed, the relevant floor plan, and other relevant certificates and information.
Fourth, finally go to the "Industrial and Commercial Bureau" to apply for "outdoor billboard" materials that need to be submitted: business license; ID card of the person in charge; copy of the billboard pattern; copy of the license of the advertising unit with the right to operate advertising; Planning Bureau, Law Enforcement Bureau, Construction Bureau, Transportation Bureau, approved application certificates.
The above reflects what departments need to go through for approval if an individual wants to invest in an outdoor advertising screen. What aspects of the project are mainly approved by each relevant department? If we personally want to invest in a screen, we need to be specific about the relevant approval departments. What written materials should be submitted for the other party to refer to, review, and approve.
To apply for approval of an advertising display screen, the following supporting documents must be submitted for verification:
1. A copy of the business license; (issued by the Industrial and Commercial Bureau)
2. A copy of the advertising business license; (issued by the Industrial and Commercial Bureau) (Issue)
3. The feasibility study report mainly focuses on the installation of this screen to brighten the local city and increase the local commercial value. It is easier to manage by administrative units than traditional outdoor billboards and is environmentally friendly. The country has introduced laws to strongly support it. Electronic screens replace traditional outdoor billboards, etc. Analytical reports on aspects of the project were drafted in aspects that were beneficial to the local city, and were reviewed and approved on the one hand.
4. Approval documents from superior authorities; (i.e., review documents from the above planning bureau, public security bureau, etc.)
5. Original agreement on the use of advertising release sites; for example: if you want to erect a screen on the exterior wall of a shopping mall, You need to sign a site rental agreement with the other party. On which building roof or wall the traditional outdoor billboard is to be placed, you must sign a site rental agreement (divided into years) with the other party, and then use this agreement to handle related matters. formalities.
6. If the installation location needs to be approved by the relevant government departments according to laws and regulations, the approval documents from the relevant departments must be submitted;
Basic conditions for applying for outdoor advertising registration:
1. Obtained in accordance with the law Business qualifications consistent with the application matters.
2. Own the ownership of the corresponding outdoor advertising media.
3. The location and form of advertising shall be within the scope permitted by national laws and comply with the requirements of the outdoor advertising setting planning of the local people's government and advertising management department.
4. Outdoor advertising media are generally not allowed to publish various types of non-advertising information. Those with special needs must comply with relevant national regulations.
Registration procedures and relevant requirements:
1. Applications for registration of outdoor advertising should be submitted to the industrial and commercial office at the place of publication thirty days before the advertisement is released. Registration will be accepted and registered after the supporting documents are complete, and payment shall be made in accordance with regulations. Registration fees.
2. Outdoor advertisements that have been reviewed and approved must be published according to the registered location, form, specifications, time, etc., and may not be changed without authorization. The registration approval number must be published at the same time as the advertising content.
3. If outdoor advertisements are not published within three months after registration, they should apply to the original registration authority for deregistration.

Photoshop makes outdoor advertising renderings, how to do this?

You can use the pen tool to draw the outline first, and then color and text. Pay attention to the perspective relationship.

How to make a billboard with cdr Titanium brushed effect picture

Use the layer folding tool and adjust the transparency to create the effect.

Find a rendering with a brushed effect, such as a movie rendering. Place the image you want to create on the second layer, use the transparency tool, and adjust the transparency of the rendering according to the desired effect. , perform stroke processing on the desired effect and delete other useless parts.

A well-covered billboard can not only achieve a good publicity effect, but is also artistic in itself. The most classic method of outdoor billboards is to make clever use of the environment. Integrate the billboard with the surrounding environment to create a stronger visual impact. It makes the viewer instantly understand that this is what it is, and at the same time, it makes them feel guilty.

How to design advertising renderings?

I have been engaged in display design for eleven years and have made countless renderings, but I have never heard of the project of advertising renderings. If you understand it literally, it is to make a three-dimensional rendering of a product or product scene application in order to achieve the effect of advertising! Most of them are used by e-commerce groups. Because of the limitation of shooting costs, many orange e-commerce companies In order to save money, we no longer build shooting locations for products, but instead use three-dimensional virtual scenes, and use renderers to obtain scene pictures that cannot be satisfied by camera shooting. To make this advertising rendering, you must first use 3D design software, edit various materials accurately, and master the layout of virtual lights and virtual camera adjustments! A good advertising rendering requires not only learning 3D software , Graphic software cannot be missing. The final pre sentation must use graphic software to edit and typeset advertising fonts and promotional copy in order to more accurately convey the content of the advertising!