How to stick foam billboards to wall coverings
作者：行季识 | 发布日期：2024-09-22 04:41:44
⒈What are the tips for choosing brand wall coverings and what are the methods for pasting brand wall coverings?
Branded wall coverings are relatively good in terms of quality, decorative effect, and after-sales, so when choosing When it comes to wall coverings, branded wall coverings have become the first choice for many people. Next, we will take you to learn more about it. What are the techniques for choosing brand wall coverings? What are the methods for pasting brand wall coverings? I hope the following introduction will Help you.
1. What are the tips for choosing brand wall coverings
1. Tips for choosing brand wall coverings: Look at the style. The first main choice for wall coverings is to look at the style. As a rule, the style of glossy wall coverings largely corresponds to the decorative style of the home, these designs not only make the atmosphere of the space more harmonious, but also beautiful.
2. Tips for choosing brand wall coverings: Look at the size. The second main choice for wall coverings is to look at their size. Usually, the size of the wall covering is mainly selected based on the actual area of the house wall, so there will be no discomfort when laying it. Therefore, users must pay attention to the size selection.
3. Tips for choosing brand wall coverings: Look at the surface. The third main choice for wall coverings is to look at the surface. As a rule, high-quality wall coverings have a very smooth and dust-free surface. Therefore, consumers should pay attention to surface inspections when choosing not to panic.
4. Tips for choosing brand wall coverings: Look at the price. The fourth main choice for wall coverings is to look at the price. Generally speaking, high-quality wall coverings are not cheap. Therefore, consumers should not choose poor quality products out of greed.
2. What are the methods for pasting brand wall coverings?
1. The first step of pasting is to treat the wall surface. Use a scraper to scrape off surface impurities to make the uneven surface smooth, and fill the gaps with gypsum powder. If the texture of the wall is smooth, or there is a powder layer and the latex paint is swept into it, applying the wall covering base film once to allow the wall to harden will not cause the wallpaper to fall off.
2. The next thing we need to do is to cut off the wall covering. First measure the height and width of the wall. According to the height of the wall, reduce the height of the wallpaper to 5-8 cm. Trim the upper lines. Flower wallpaper should be considered To the symmetry of the pattern, so the cutting length increases, usually from 8 to -10 cm.
3. Gluing is the next thing that needs to be done. Apply wallpaper glue on the back of the wall cloth, paying special attention to the construction quality. Make sure that the wallpaper applied on the wall is folded for 5-10 minutes around the glue edge (wallpaper, especially It is a non-woven fabric) Do not apply external force to avoid wrinkles. ) After the glue has completely penetrated the bottom of the paper, you can apply the glue each time you apply several wallpapers and post them in sequence.
4. The structure of the wall covering also needs to be understood. Usually the first wall covering is affixed from the inside to the outside with a scraper from the top or bottom, or from top to bottom, gently scrape off the wallpaper, squeeze out Press the foam and excess glue. Keep the wallpaper flat against the wall.
5. The last step is to trim and clean, remove the extra wallpaper on the top and bottom, the blade should be sharp to avoid burrs. Then use a sponge to soak the adhesive on the wallpaper surface and wipe the wallpaper completely so that it does not turn the wallpaper yellow. If the wallpaper dries, bubbles will appear on the surface. You can remove the injection glue by cutting it with a knife and then leveling it.
What are the tips for choosing brand wall coverings? What are the methods for pasting brand wall coverings? If everyone can figure it out, this is my biggest wish.
1. What are the tips for choosing brand wall coverings
1. Tips for choosing brand wall coverings: Look at the style. The first main choice for wall coverings is to look at the style. As a rule, the style of glossy wall coverings largely corresponds to the decorative style of the home, these designs not only make the atmosphere of the space more harmonious, but also beautiful.
2. Tips for choosing brand wall coverings: Look at the size. The second main choice for wall coverings is to look at their size. Usually, the size of the wall covering is mainly selected based on the actual area of the house wall, so there will be no discomfort when laying it. Therefore, users must pay attention to the size selection.
3. Tips for choosing brand wall coverings: Look at the surface. The third main choice for wall coverings is to look at the surface. As a rule, high-quality wall coverings have a very smooth and dust-free surface. Therefore, consumers should pay attention to surface inspections when choosing not to panic.
4. Tips for choosing brand wall coverings: Look at the price. The fourth main choice for wall coverings is to look at the price. Generally speaking, high-quality wall coverings are not cheap. Therefore, consumers should not choose poor quality products out of greed.
2. What are the methods for pasting brand wall coverings?
1. The first step of pasting is to treat the wall surface. Use a scraper to scrape off surface impurities to make the uneven surface smooth, and fill the gaps with gypsum powder. If the texture of the wall is smooth, or there is a powder layer and the latex paint is swept into it, applying the wall covering base film once to allow the wall to harden will not cause the wallpaper to fall off.
2. The next thing we need to do is to cut off the wall covering. First measure the height and width of the wall. According to the height of the wall, reduce the height of the wallpaper to 5-8 cm. Trim the upper lines. Flower wallpaper should be considered To the symmetry of the pattern, so the cutting length increases, usually from 8 to -10 cm.
3. Gluing is the next thing that needs to be done. Apply wallpaper glue on the back of the wall cloth, paying special attention to the construction quality. Make sure that the wallpaper applied on the wall is folded for 5-10 minutes around the glue edge (wallpaper, especially It is a non-woven fabric) Do not apply external force to avoid wrinkles. ) After the glue has completely penetrated the bottom of the paper, you can apply the glue each time you apply several wallpapers and post them in sequence.
4. The structure of the wall covering also needs to be understood. Usually the first wall covering is affixed from the inside to the outside with a scraper from the top or bottom, or from top to bottom, gently scrape off the wallpaper, squeeze out Press the foam and excess glue. Keep the wallpaper flat against the wall.
5. The last step is to trim and clean, remove the extra wallpaper on the top and bottom, the blade should be sharp to avoid burrs. Then use a sponge to soak the adhesive on the wallpaper surface and wipe the wallpaper completely so that it does not turn the wallpaper yellow. If the wallpaper dries, bubbles will appear on the surface. You can remove the injection glue by cutting it with a knife and then leveling it.
What are the tips for choosing brand wall coverings? What are the methods for pasting brand wall coverings? If everyone can figure it out, this is my biggest wish.
