1. 首页
  2. 广告灯
  3. 正文

How to set the timing switch for advertising lights

2024-09-21 17:22:53
壹、How to adjust the street light timing control

How to adjust the street light timing control

How to set the time on the push-button time control switch?

1. First pre ss the "Cancel/Resume" key 4 times to unlock the screen.

2. Press the "Correction Time" button to correct the hour, the "Correction Minute" button to correct the minute, and the "Correction Day" button to correct the day of the week.

3. Press the "Timing" button again to set the power on and off time (according to your own needs).

4. Press the "Auto/Manual" button and adjust it to "Auto".

How to set the time on the Bluetooth time control switch?

1. Turn on the Bluetooth of your mobile phone, scan the QR code on the switch with WeChat, control the layout of the mini program, and enter the password. The initial password is 0000.

2. Click Timing Settings to set the timing switch time according to your own needs.

3. After the settings are completed, click the Save and Send to switch.

贰、This is the control switch of the street light. Because the street light will turn on at 5 o'clock tomorrow afternoon, I feel there is no need to turn on the light so early. I want to set the time to turn on at 7 o'clock. May I ask?
KG316T microcomputer The time control switch can set multiple groups of on and off controls. You can also set up only one group. I guess yours is one group. The adjustment method is as follows: 1. Press the "Timing" button on the panel once, and the screen will display "1 Group On·—:—", then pre ss the "Time Calibration" button to adjust to 19:00, and then pre ss the "Timing" button on the panel twice. The screen displays "Group 1·—:—", pre ss the "Time Adjustment" key to adjust to 05:30. The first group is set up. Second, check whether this group is Monday, or Monday to Sunday. If it is the whole week, it is completed. If it's one day, you can try pre ssing "School Week" until Monday, Tuesday Sunday appears. After finishing, pre ss the "Clock" key on the panel to exit, and finally pre ss the "Auto/Manual" key on the panel to adjust to the automatic position. All settings are completed and it will run repeatedly every day. Good luck!

相关文章