How to measure the advertising size of van body

Traffic control regulations must be followed when advertising on the body of a private car. Advertising is not allowed on the front and rear windshields, front hood and trunk lid of the car, and the main body of the car cannot be changed. Color, all advertising area shall not exceed 2/3 of the vehicle body. If a registered motor vehicle changes the color of its body, it must apply to the traffic control department for change registration. Therefore, the area for advertising on the car body should not be too large, endanger driving safety, or block the driver's view. Strictly abide by motor vehicle management regulations, and the advertising area must not exceed two-thirds of the vehicle body area, mainly on both sides of the vehicle body, and a small part of the rear. And do not post it on the car window to affect the line of sight, so as to pre vent the car owner from being punished by the traffic police. If it exceeds the limit, a fine of 500 to 1,000 yuan will be imposed. If rectification is not made, the annual review will not be possible.
Legal basis:
Article 47 of the "Motor Vehicle Registration Regulations" spraying or pasting logos or body advertisements on motor vehicles that affects safe driving", "changing the color of the body, replacing the engine, "If the vehicle body or frame fails to be changed and registered within ten days after the change", the traffic management department of the public security organ will issue a warning or a fine of not more than 200 yuan.

Inkjet printing technology is generally used to produce body advertising. Vinyl car stickers are better produced. Different brands of car stickers have different prices. There are cost issues, design draft issues, and installation time issues, so I can't answer the price correctly. It can only be roughly around 1,000-2,000 yuan. It is recommended to find a regular car body advertising company, because in addition to the above problems, it takes more than 3 minutes to make a body advertising. First, you need to get approval from the vehicle management office before you can drive on the road, so you also need to know what documents you need to pre pare for filing and approval.

The detailed parameters of a 4-meter-2 van:

The body size is relatively flexible. The length of the vehicle is usually 2 meters, and the width is divided into 1 meter, 15 meters and 25 meters. The bases for the front and rear cargo box can be purchased separately. Drivers can customize the size of the cargo box according to their own needs and only need to report it to the Traffic Management Bureau.

The standard size of a van: the length is generally 2 meters, the width and height range between 6-8 meters, and it has the ability to tow a trailer. This design allows the truck to load and transport cargo efficiently.

However, it should be noted that the dimensions of vans are not fixed and different models of vans may have slight size differences. Vans, because of their fully sealed design, are particularly suitable for transporting all types of items, even chemical hazardous materials that require special protection.

For a conventional 2-meter container vehicle, if the edges are included, the total length will be about 4 meters. Considering the space between the cargo box and the cab, 20 centimeters are usually reserved, so the length of the cab usually does not exceed 4 meters. The specific announced model is shown as 5995 or 5990.