The advertising words on the license plate frame can be erased. You can use gasoline or rubber water for deep cleaning. This is because the country has issued relevant regulations a few years ago, and no advertising is allowed in the front and rear license plate frames. Otherwise, if you are caught by the traffic police and have improperly installed license plates, you will be deducted points and fined. Therefore, the billboards posted by 4S stores can be removed.

How to remove car body advertisements from the car body

1. Soak in warm water for 25 minutes. After soaking until it is softer, you can start tearing it off. When tearing, you need to tear it slowly. When you encounter a place that is difficult to tear, you need to soak the torn area with warm water, so that it can be torn off slowly. It's not over yet. Spre ading it like this will definitely leave adhesive and marks. You also need to use thinner to apply it, and finally remove it with a rag.

2. Wet the area with the car body advertisement with water and blow it with a hair dryer. This will increase the temperature and the adhesive will melt and lose its stickiness, making it easy to tear off. Then use a slightly Easily removed with a damp soft cloth.

3. Use the auxiliary material - Fengyoujing, and apply a layer of Fengyoujing on the surface of the self-adhesive body sticker you want to remove, allowing the Fengyoujing to soak into the sticker. Stick it on, wait for about 10 minutes, wipe it hard with a dry cloth, and you will find that the sticker will fall off easily, and there will be no trace of removal.

4. Use special cleaners for stickers, and the efficiency of use is low. There are many special cleaners on the market. You can buy a can of glue remover spray from the auto supplies cabinet in the supermarket. , after purchasing it, just follow the instructions above to use it, it is quick and convenient. Auxiliary materials include thinner, gasoline, acetone, detergent, etc.