Can billboards be adhered with double-sided tape?
本文目录一览
- I、What kind of glue is used to stick snack billboards?
- II、How to replace the billboards in the elevator?
- III、What should I use if the billboard falls off the wall?
- IV、How to modify the gas station pillar billboard
Plastic double-sided tape is very easy to use
Lift it up to hang it, some are directly double-sided glued
One is glass glue. It is easier to use and easy to tear off. It will not leave an offset mark. But you need to use a small amount of glue. Surface tape is used to fix it. The glass glue takes 3 hours to dry. There is also double-sided tape, but it is not easy to handle and has to be scraped after being peeled off. There is also universal glue that can be applied to the wall after being peeled off. But this is after it is peeled off. There will be difficult offset printing
1. When replacing the billboard, two people are required.
2. First remove the top buckle, then put the advertising stand down, and take out the glass and the picture from the base.
3. Wear fingerprint-free gloves, replace the screen that needs to be replaced, and use thin double-sided tape to simply fix the screen on the top and bottom. Special care should be taken not to leave fingerprints.
4. Just put it back after the replacement is completed.
2. First remove the top buckle, then put the advertising stand down, and take out the glass and the picture from the base.
3. Wear fingerprint-free gloves, replace the screen that needs to be replaced, and use thin double-sided tape to simply fix the screen on the top and bottom. Special care should be taken not to leave fingerprints.
4. Just put it back after the replacement is completed.