The strong visual impact makes it have a high-quality personality and become an excellent guide media both indoors and outdoors. Nowadays, it has been widely used in stations, airports, docks, stadiums, walls and roofs of large buildings and other outdoor areas. At the same time, it is also widely used indoors in exhibitions, shopping malls, entertainment venues, door decorations, etc. The editor below will introduce to you the production process of a three-sided billboard. Let's watch it together.
Three-sided billboard production process
The first is the problem of advertising paintings, which is obviously relatively simple. We need to design and print the three advertisements to be printed according to the arrangement area of ​​the triangular prisms, then arrange the triangular prisms neatly, and stick the printed inkjet advertisements firmly on the triangular prisms with strong adhesive. (Note that only one side can be glued here, and the three paintings must be glued in a unified order.) Then separate the triangular prisms. Repeat this three times and you're done.
Then there is the issue of the rotation of the triangular prism. There are three common forms of uniform flipping, wave flipping, and episodic flipping. The current mainstream form is the wave flipping form. Because of this method, it will not cause too much work burden on the motor in the billboard, and it is not prone to failure. However, because the flipping is not synchronized, the technical requirements are very high.
The last thing is the installation of the triangular prism. When we install the triangular prism on the main body of Qixiang. Be sure to pay attention to whether each triangular prism is installed backwards or incorrectly! After installation, you must check it carefully several times, because if a triangular prism billboard is installed incorrectly, it will directly affect the effect of the entire billboard.
Characteristics of three-sided billboards
Compared with ordinary outdoor street signs, three-sided billboards have two major characteristics and advantages: first, they carry a large amount of advertising, which is three times that of ordinary outdoor street signs; second, they are eye-catching , intermittent flipping and pauses can better attract the attention of passing people and achieve greater advertising effects.
Three-sided flip billboard technology
Three-sided flip billboard is composed of three-level triangular prisms positioned side by side. The triangular prisms are made of special aluminum profiles. The motor drives all the triangular prisms to rotate around their own central axis. Three pictures can be formed by using the three sides of the triangular prisms.
The logic controller is the core of the three-sided flip control system. It accepts the input signal from the proximity switch and controls the start and stop of the billboard motor after being processed by the system logic.
The following flipping modes are common for three-sided flip billboards:
Wave style: sequentially flipping from one side to the other.
Opening Ceremony: Flip sequentially from the middle to both sides (two or more motors are required).
Closing Ceremony: Flip sequentially from both sides to meet in the middle (two or more motors are required).
Quick variation: all prisms flip at the same time (suitable for small areas).